Heat & Glo LifeStyle TWILIGHT-II Getting Started, Design and Installation Considerations

Page 5

2 Getting Started

A. Design and Installation Considerations

Heat & Glo direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required.

The Twilight-II has been carefully engineered to provide a unique fireplace experience. Since it is different than any other product on the market, care must be taken when installing this appliance so that our customer does not experience undesirable performance or conditions.

1.Install the appliance according to this Owner’s Guide paying particular attention to flashing and sealing instructions.

2.In the cold northern climates pay attention to exposures and prevailing wind conditions when locating the appli- ance, the same as you would for locating exterior win- dows and doors.

The Twilight-II has the thermal characteristics of a high quality window system. Temperatures near the appliance will be cooler than what is realized with a fully insulated wall.

Operation of the appliance will eliminate any cool drafts and will provide the room with a comfortable ambiance.

CAUTION

Check building codes prior to installation.

Installation MUST comply with local, regional, state and national codes and regulations.

Consult insurance carrier, local building, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

When planning an appliance installation, it’s necessary to determine the following information before installing:

Where the appliance is to be installed. See Section 3.

Gas supply piping. See Section 6.

Electrical wiring. See Section 7.

Framing and finishing details. See Sections 3 and 8.

Whether optional accessories—devices such as a fan, wall switch, or remote control—are desired. See Section 9.

WARNING

Keep appliance dry.

Mold or rust may cause odors.

Water may damage controls.

B. Tools and Supplies Needed

Before beginning the installation be sure that the following tools and building supplies are available.

Reciprocating saw

Framing material

Pliers

Hi temp caulking material

Hammer

Gloves

Phillips screwdriver

Framing square

Flat blade screwdriver

Electric drill and bits (1/4 in.)

Plumb line

Safety glasses

Manometer

Voltmeter

Tape measure

Level

Non-corrosive leak check solution

1/2 - 3/4 inch length, #6 or #8 Self-drilling screws One 1/4 inch female connection (for optional fan)

C.Inspect Appliance and Components

WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

Do NOT install damaged components.

Do NOT install incomplete components.

Do NOT install substitute components.

Report damaged parts to dealer.

Carefully remove the appliance and components from the packaging.

The trim doors are shipped in a separate package.

The gas logs may be packaged separately and must be field installed.

Report to your dealer any parts damaged in shipment, particularly the condition of the glass.

Read all of the instructions before starting the instal- lation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

WARNING

Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:

Installation and use of any damaged appliance or vent system component.

Modification of the appliance or vent system.

Installation other than as instructed by Hearth & Home Technologies.

Improper positioning of the gas logs.

Installation and/or use of any component part not approved by Hearth & Home Technologies.

Any such action may cause a fire hazard.

Heat & Glo LifeStyle Collection • Twilight-II2087-900 Rev. G • 12/05

5

Image 5
Contents Model Twilight-II Homeowner Reference Information CongratulationsTable of Contents 1Listing and Code Approvals Getting Started Design and Installation ConsiderationsTools and Supplies Needed Inspect Appliance and ComponentsSelecting Appliance Location Framing and ClearancesClearances to Combustibles ClearancesHood Mantel Projections Interior onlyAppliance Opening Minimum Clearances Termination LocationsPlacing Metal Hearth Strip Appliance PreparationSecuring and Leveling the Appliance Outside Fuel Conversions Gas Connection Gas InformationGas Pressures Pressure Natural Gas PropaneHigh Altitude Installations Electrical Information Recommendation for WireConnecting to the Appliance Wall Switch Optional AccessoriesFan Installation Optional Accessories Requirements Intellifire Ignition System WiringWall Switch Installation for Fan Optional Junction Box InstallationMantel Projections FinishingFacing Material Inside Facing MaterialOutside Facing Material Housewrap Building Paper and Sheathing Clean the Appliance Appliance SetupAccessories Lava Rock and Ember PlacementInch Log Set Assembly LOGS-TWIPositioning the Logs Sharp Notch Sharp Notch Smooth CutoutShutter Settings Glass AssemblyRemoving Glass Assembly Replacing Glass AssemblyBefore operating this appliance have a qualified technician Operating InstructionsBefore Lighting Appliance Intellifire Ignition Lighting ApplianceFinal Inspection by After Appliance is Lit Frequently Asked QuestionsInitial Break-in Procedure Intellifire Ignition System TroubleshootingIntellifire Ignition System Before servicing Maintaining and Servicing ApplianceInspect Maintenance Tasks 13Reference Materials Appliance Dimension DiagramTwilight-II Log Set AssemblyTwilight-II Service Parts ListService Parts Limited Lifetime Warranty Heat & GLO GAS Appliance Products Limited Lifetime WarrantyContact Information

TWILIGHT-II specifications

The Heat & Glo LifeStyle TWILIGHT-II is a revolutionary gas fireplace that delivers an unparalleled ambiance and efficiency to modern living spaces. With its sleek design and cutting-edge technology, it serves as the perfect centerpiece for any room while providing warmth and comfort.

One of the standout features of the TWILIGHT-II is its unique, see-through design, allowing users to enjoy the mesmerizing flames from multiple angles. This flexibility not only enhances the aesthetic appeal of any space but also creates a cozy atmosphere, making it perfect for both entertaining guests and enjoying quiet evenings at home.

The TWILIGHT-II is equipped with advanced ignition technologies, such as the IntelliFire Touch system, which ensures a reliable and easy start every time. This user-friendly touch-sensitive control allows homeowners to ignite the fireplace with a simple press. Furthermore, the system is designed to enhance safety by providing electronic ignition and a backup battery system, ensuring the flames can be lit even during power outages.

Another remarkable characteristic of the TWILIGHT-II is its impressive heat output. With the capacity to generate up to 40,000 BTUs, this fireplace efficiently warms large areas, making it an ideal solution for both residential and commercial spaces. The adjustable flame height is another feature that lets homeowners customize their experience, whether they desire a romantic flicker or a more robust display of flames.

Energy efficiency is a priority with the TWILIGHT-II, which is designed with vent-free technology that maximizes heat retention and minimizes heat loss. The fireplace carries a high efficiency rating, which not only contributes to cost savings on energy bills but also reduces environmental impact.

Additionally, the TWILIGHT-II offers a variety of customizable options to suit individual tastes. With multiple media options such as glass beads, driftwood, and various color choices for the interior, users can create a truly personalized look that complements their décor.

In summary, the Heat & Glo LifeStyle TWILIGHT-II embodies modern fireplace design and technology. With its elegant aesthetics, innovative ignition systems, exceptional heating capabilities, and customizable features, it stands out as a premier choice for homeowners seeking to enhance their living environment. Whether hosting gatherings or enjoying a serene evening alone, the TWILIGHT-II provides the perfect solution to all your heating and aesthetic needs.