Heat & Glo LifeStyle ST-42TVFL-IPI owner manual Step Gas Supply Line

Page 17

Step 7

The Gas

Supply Line

NOTE: Have the gas supply line installed in accordance with local building codes by a qualified installer approved and/or licensed as required by the locality. (In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter).

NOTE: Before the first firing of the fireplace, the gas supply line should be purged of any trapped air.

NOTE: Consult local building codes to properly size the gas supply line leading to the 1/2 inch (13 mm) hook-up at the unit.

This gas fireplace is designed to accept a 1/2 inch (13 mm) gas supply line. To install the gas supply line:

•A listed (and the Commonwealth of Massachusetts approved) 1/2 inch (13mm) tee-handle manual shut- off valve and a listed flexible gas connector are connected to the 1/2 inch (13mm) inlet of the con- trol valve. NOTE: If substituting for these compo- nents, please consult local codes for compliance.

•The gas line may be run from either side of the fireplace provided the hole in the outer wrap does not exceed 2 inches in diameter and it does not penetrate the airtight firebox.

•The gap between the supply piping and gas access hole can be plugged with non-combus- tible insulation to prevent cold air infiltration.

•Locate the gas line access hole in the outer casing of the fireplace.

•Remove decorative door by lifting up away to gain access to the gas control and shut-off valve, insert the gas supply line through the gas line hole, and connect it to the shut-off valve.

•When attaching the pipe, support the control so that the lines are not bent or torn.

•After the gas line installation is complete, all connections must be tightened and checked for leaks with a commercially available, non-corro- sive leak check solution. Be sure to rinse off all leak check solution following testing.

!WARNING: DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS.

17

Heat & Glo • ST-42TVFL-IPI • 455-902 Rev. C • 12/07

Page 16 Page 18
Image 17
Page 16 Page 18
Contents ST-42TVFL-IPI Installation and OperationSafety and Warning Information Getting Started Table of ContentsInstalling the Fireplace ST-42TVFL-IPI ST-42TVFL-IPI IPI Valve AssemblyHigh Altitude Installations Installation CodesCodes Approvals and CodesGetting Started Diagram of the ST-42TVFL-IPI Step Installing the FireplaceLocating FireplaceStep Framing Fireplace Framing DimensionsStep Negative Pressure Make-up Air Make-up Air Air DamperVent System Approvals Step Installing Vent SystemVent System Attachment Vent Termination Bedroom Installation in CanadaStep Gas Control System Step Positioning Leveling, Securing FireplaceStep Gas Supply Line Pressure Natural Gas Propane Step Gas Pressure RequirementsOptional Accessories Step Wiring FireplaceWall Switch Appliance RequirementsOperation using Battery Power Junction Box Wired to Wall Switch Wall Switch Installation for Fan OptionalStep Finishing Installing the Trim Step Installing Trim Logs, and Ember MaterialHearth Extensions Positioning the LogsPlacing the Ember Material Placement of the Ember MaterialDouble-check for faulty components Step Before Lighting Fireplace After InstallationMaintaining and Servicing Your Fireplace MaintenanceInch Burner Flame PatternsContact Information

ST-42TVFL-IPI specifications

The Heat & Glo LifeStyle ST-42TVFL-IPI is an innovative gas fireplace that combines style, efficiency, and cutting-edge technology to enhance any home. With its sleek design and modern features, this fireplace is perfect for those looking to create a cozy atmosphere while enjoying the benefits of a high-performance heating solution.

One of the standout features of the ST-42TVFL-IPI is its unique design. The fireplace boasts a large viewing area with a contemporary aesthetic, allowing for an unobstructed view of the flames. The expansive glass front not only adds to the visual appeal but also ensures optimal heat distribution throughout the space. The unit comes in several finishes, allowing homeowners to choose the perfect look that complements their interior design.

The ST-42TVFL-IPI operates with an innovative IntelliFire™ ignition system, which ensures a reliable start every time you need it. This system also offers on-demand heating, providing users the flexibility to heat their homes efficiently. The fireplace is designed with an adjustable flame height, giving users control over the intensity of the fire and the atmosphere it creates.

Energy efficiency is a hallmark of the Heat & Glo LifeStyle series, and the ST-42TVFL-IPI is no exception. With an impressive Efficiency Rating, this unit can efficiently heat large spaces, making it an ideal choice for both residential and light commercial applications. The fireplace uses direct vent technology, which minimizes heat loss and ensures that outdoor air is used for combustion, maximizing the heat output inside.

Additionally, the ST-42TVFL-IPI features an easy-to-use remote control that allows users to adjust settings conveniently from anywhere in the room. This modern convenience enhances user experience, allowing for effortless control over the fireplace’s operation.

Safety is paramount, and Heat & Glo prioritizes this with features such as a glass front that stays cool to the touch, reducing the risk of burns. The integrated safety shut-off system provides peace of mind, ensuring the fireplace is equipped to prevent any potential hazards.

In summary, the Heat & Glo LifeStyle ST-42TVFL-IPI is a sophisticated and efficient gas fireplace that offers homeowners a blend of modern design, advanced technology, and robust safety features. Its stylish appearance, along with energy-efficient heating capabilities, makes it a standout choice for anyone looking to enhance their living space.
Top Page Image Contents