Heat & Glo LifeStyle ST-42TVFL-IPI owner manual Step Installing Trim Logs, and Ember Material

Page 23

1.Apply only non- combustible facing material to the fireplace surround.

ST-42TVFL-IPI

1/2"

TOP EDGE

SIDE EDGE

1/2" GAP

BOTH ENDS

Figure 13. Sealant Material

Hearth Extensions

A hearth extension may be desirable for aesthetic reasons. However, ANSI or CAN/CGA testing standards do not require hearth extensions for gas fireplace appliances.

Step 11

Installing Trim,

Logs, and Ember

Material

Installing the Trim

Combustible materials may be brought up to the specified clearances on the side and top front edges of the fireplace, but MUST NEVER overlap onto the front face. The joints between the finished wall and the fireplace top and sides can only be sealed with a 300° F. (149° C) minimum sealant.

!WARNING: WHEN FINISHING THE FIREPLACE, NEVER OBSTRUCT OR MODIFY THE AIR INLET/OUTLET GRILLES IN ANY MANNER.

23

Install optional marble and brass trim surround kits as desired. Marble, brass, brick, tile, or other non-combustible materials can be used to cover up the gap between the sheet rock and the fireplace.

Do not obstruct or modify the air inlet/outlet grilles. When overlapping on both sides, leave enough space so that the glass door can be removed.

Positioning the Logs

If the gas logs have been factory installed they should not need to be positioned.

If the logs have been packaged separately, refer to the installation instructions that accompany the logs. Save the log instructions with this manual.

If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.

Heat & Glo • ST-42TVFL-IPI • 455-902 Rev. C • 12/07

Page 22 Page 24
Image 23
Page 22 Page 24
Contents ST-42TVFL-IPI Installation and OperationSafety and Warning Information Getting Started Table of ContentsInstalling the Fireplace ST-42TVFL-IPI ST-42TVFL-IPI IPI Valve AssemblyApprovals and Codes Installation CodesHigh Altitude Installations CodesGetting Started Diagram of the ST-42TVFL-IPI Fireplace Installing the FireplaceStep LocatingStep Framing Fireplace Framing DimensionsStep Negative Pressure Make-up Air Make-up Air Air DamperVent System Approvals Step Installing Vent SystemVent System Attachment Vent Termination Bedroom Installation in CanadaStep Gas Control System Step Positioning Leveling, Securing FireplaceStep Gas Supply Line Pressure Natural Gas Propane Step Gas Pressure RequirementsAppliance Requirements Step Wiring FireplaceOptional Accessories Wall SwitchOperation using Battery Power Junction Box Wired to Wall Switch Wall Switch Installation for Fan OptionalStep Finishing Positioning the Logs Step Installing Trim Logs, and Ember MaterialInstalling the Trim Hearth ExtensionsPlacing the Ember Material Placement of the Ember MaterialDouble-check for faulty components Step Before Lighting Fireplace After InstallationBurner Flame Patterns MaintenanceMaintaining and Servicing Your Fireplace InchContact Information

ST-42TVFL-IPI specifications

The Heat & Glo LifeStyle ST-42TVFL-IPI is an innovative gas fireplace that combines style, efficiency, and cutting-edge technology to enhance any home. With its sleek design and modern features, this fireplace is perfect for those looking to create a cozy atmosphere while enjoying the benefits of a high-performance heating solution.

One of the standout features of the ST-42TVFL-IPI is its unique design. The fireplace boasts a large viewing area with a contemporary aesthetic, allowing for an unobstructed view of the flames. The expansive glass front not only adds to the visual appeal but also ensures optimal heat distribution throughout the space. The unit comes in several finishes, allowing homeowners to choose the perfect look that complements their interior design.

The ST-42TVFL-IPI operates with an innovative IntelliFire™ ignition system, which ensures a reliable start every time you need it. This system also offers on-demand heating, providing users the flexibility to heat their homes efficiently. The fireplace is designed with an adjustable flame height, giving users control over the intensity of the fire and the atmosphere it creates.

Energy efficiency is a hallmark of the Heat & Glo LifeStyle series, and the ST-42TVFL-IPI is no exception. With an impressive Efficiency Rating, this unit can efficiently heat large spaces, making it an ideal choice for both residential and light commercial applications. The fireplace uses direct vent technology, which minimizes heat loss and ensures that outdoor air is used for combustion, maximizing the heat output inside.

Additionally, the ST-42TVFL-IPI features an easy-to-use remote control that allows users to adjust settings conveniently from anywhere in the room. This modern convenience enhances user experience, allowing for effortless control over the fireplace’s operation.

Safety is paramount, and Heat & Glo prioritizes this with features such as a glass front that stays cool to the touch, reducing the risk of burns. The integrated safety shut-off system provides peace of mind, ensuring the fireplace is equipped to prevent any potential hazards.

In summary, the Heat & Glo LifeStyle ST-42TVFL-IPI is a sophisticated and efficient gas fireplace that offers homeowners a blend of modern design, advanced technology, and robust safety features. Its stylish appearance, along with energy-efficient heating capabilities, makes it a standout choice for anyone looking to enhance their living space.
Top Page Image Contents