Heat & Glo LifeStyle ST-42TVFL-IPI Placing the Ember Material, Placement of the Ember Material

Page 24

•Save the remaining ember materials for use during fireplace servicing. The bag of embers provided is suf- ficient for 3 to 5 appli- cations.

•Replace the wing nut, glass clips and screws.

•Replace glass door and a front trim door on unit.

•Hand tighten the wing nut.

GLASS SPECIFICATIONS:

LARGE GLASS: TEMPERED

SMALL GLASS: TEMPERED

Heat & Glo fireplaces manufactured with tempered glass may be installed in hazardous locations such as bath- tub enclosures as defined by the CPSC. The tempered glass has been tested and certified to the requirements of ANSI Z97.1-1984 and CPSC 16 CFR 1202. (Safety Glazing Certification Council SGCC # 1595 and 1597. Architectural Testing, Inc. Reports 02-31919.01 and 02- 31917.01.)

This statement is in compliance with CPSC 16 CFR Section 1201.5 “Certification and labeling requirements” which refers to 15 USC 2063 stating “…Such certifi- cate shall accompany the product or shall otherwise be furnished to any distributor or retailer to whom the prod- uct is delivered.”

Some local building codes require the use of tempered glass with permanent marking in such locations. Glass meeting this requirement is available from the factory. Please contact your dealer or distributor to order.

Placing the Ember Material

Ember material is shipped with this gas fireplace. The bag labeled Golden Ember (GE-93) is flame colorant material. The bag labeled Glowing Ember (050-721) is standard glowing ember material. To place the ember material:

•Remove wing nuts and glass clips or tension springs around glass door. Remove glass door from unit.

•Place dime size pieces of ember material about 1/2 inch apart near port holes in burner top. Do NOT press embers into burner ports. Cover the top of the burner with a single layer of ember material. For best performance do NOT place embers on the ports at the rear of the burner.

Figure 14. Placement of the Ember Material

24

Heat & Glo • ST-42TVFL-IPI • 455-902 Rev. C • 12/07

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Installation and Operation ST-42TVFL-IPISafety and Warning Information Table of Contents Installing the FireplaceGetting Started ST-42TVFL-IPI IPI Valve Assembly ST-42TVFL-IPIInstallation Codes High Altitude InstallationsCodes Approvals and CodesGetting Started Diagram of the ST-42TVFL-IPI Installing the Fireplace StepLocating FireplaceFraming Dimensions Step Framing FireplaceStep Negative Pressure Make-up Air Air Damper Make-up AirStep Installing Vent System Vent System ApprovalsVent System Attachment Bedroom Installation in Canada Vent TerminationStep Positioning Leveling, Securing Fireplace Step Gas Control SystemStep Gas Supply Line Step Gas Pressure Requirements Pressure Natural Gas PropaneStep Wiring Fireplace Optional AccessoriesWall Switch Appliance RequirementsOperation using Battery Power Wall Switch Installation for Fan Optional Junction Box Wired to Wall SwitchStep Finishing Step Installing Trim Logs, and Ember Material Installing the TrimHearth Extensions Positioning the LogsPlacement of the Ember Material Placing the Ember MaterialStep Before Lighting Fireplace After Installation Double-check for faulty componentsMaintenance Maintaining and Servicing Your FireplaceInch Burner Flame PatternsContact Information

ST-42TVFL-IPI specifications

The Heat & Glo LifeStyle ST-42TVFL-IPI is an innovative gas fireplace that combines style, efficiency, and cutting-edge technology to enhance any home. With its sleek design and modern features, this fireplace is perfect for those looking to create a cozy atmosphere while enjoying the benefits of a high-performance heating solution.

One of the standout features of the ST-42TVFL-IPI is its unique design. The fireplace boasts a large viewing area with a contemporary aesthetic, allowing for an unobstructed view of the flames. The expansive glass front not only adds to the visual appeal but also ensures optimal heat distribution throughout the space. The unit comes in several finishes, allowing homeowners to choose the perfect look that complements their interior design.

The ST-42TVFL-IPI operates with an innovative IntelliFire™ ignition system, which ensures a reliable start every time you need it. This system also offers on-demand heating, providing users the flexibility to heat their homes efficiently. The fireplace is designed with an adjustable flame height, giving users control over the intensity of the fire and the atmosphere it creates.

Energy efficiency is a hallmark of the Heat & Glo LifeStyle series, and the ST-42TVFL-IPI is no exception. With an impressive Efficiency Rating, this unit can efficiently heat large spaces, making it an ideal choice for both residential and light commercial applications. The fireplace uses direct vent technology, which minimizes heat loss and ensures that outdoor air is used for combustion, maximizing the heat output inside.

Additionally, the ST-42TVFL-IPI features an easy-to-use remote control that allows users to adjust settings conveniently from anywhere in the room. This modern convenience enhances user experience, allowing for effortless control over the fireplace’s operation.

Safety is paramount, and Heat & Glo prioritizes this with features such as a glass front that stays cool to the touch, reducing the risk of burns. The integrated safety shut-off system provides peace of mind, ensuring the fireplace is equipped to prevent any potential hazards.

In summary, the Heat & Glo LifeStyle ST-42TVFL-IPI is a sophisticated and efficient gas fireplace that offers homeowners a blend of modern design, advanced technology, and robust safety features. Its stylish appearance, along with energy-efficient heating capabilities, makes it a standout choice for anyone looking to enhance their living space.
Top Page Image Contents