Heat & Glo LifeStyle 6000ARCH, 6000XLT-CDN, 6000TR Installing Support Brackets, Install Firestops

Page 23

Use wall brackets to support vertical runs every 8 feet (2.4 m) above the fireplace flue outlet.

For Vertical Runs - The vent system must be supported every eight (8) feet (2.4 m) above the fireplace flue outlet by wall brackets.

To install support brackets for vertical runs:

•Attach wall brackets to the vent pipe and secure the wall bracket to the framing members with nails or screws.

WALL BRACKET

WALL STUD

8 FT. (2.4mm)

FLUE

OUTLET

1 INCH MIN. (25.4mm)

 

Figure 19. Installing Support Brackets

 

4. Install Firestops

 

For Horizontal Runs - Firestops are REQUIRED on

 

both sides of a combustible wall through which the

 

vent passes.

NOTE

Model DVK-01TRD does not need an exterior

 

firestop on an exterior combustible wall.

 

To install firestops for horizontal runs that pass

 

through either interior or exterior walls:

 

• Cut a 12-inch by 12-inch (305 mm X 305 mm) hole

 

through the wall. The center of the hole is one (1)

 

inch (25.4 mm) above the center of the horizontal

 

vent pipe.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Heat-N-Glo Safety and Warning Information Contents Codes Installation CodesHigh Altitude Installations Approvals and Codes Approval ListingsGetting Started If YOU are Using the Rear SET of Vent CollarsANY Such Action MAY Possibly Cause a Fire Hazard Diagram of the 6000ARCH Fireplace Ceiling Installing the Fireplace Step LocatingClearance Requirements Model Step Framing FireplaceAt Wall Firestops Identifying Vent Components Step Installing Vent SystemVent System Approvals DV-90D Straight UP Corner Installation Venting with ONE 1 90 Elbow For 6000TR & 6000XLT-CDN Venting with TWO 2 90 Elbows 6000ARCH Venting with TWO 2 90 o ElbowsVenting with three 90 elbows Venting with Three 3 90 Elbows Venting Out the Top Vent Installing Vent Components For Model 6000TRVenting Out the Rear Vent Attaching the First Vent Component to the Starting Collars Attach the First Vent Component to the Starting CollarsContinue Adding Vent Components Adding Venting Components 3. Install Support BracketsInstall Firestops Installing Support Brackets12 Hole and Vent Pipe 11 Hole and New Framing Members Attic Firestop Vent TerminationRound & Trapezoid Termination Caps If Exterior Walls are Finished with This also pertains to vertical vent systems installed Minimum Height from Roof to Lowest Discharge Opening Direct Spark Ignition DSI System Step Positioning Leveling, Securing FireplaceStep Gas Control Systems Standing Pilot Ignition SystemGas Controls Systems Step Gas Supply LinePressure Natural Gas Propane Step Gas Pressure RequirementsFor Standing Pilot Ignition Wiring Step WiringFan Wiring Diagram For Direct Spark Ignition DSI Wiring6000ARCH only MicroswitchStep Finishing Is found on modelHearth Extensions Step Installing Trim Logs, Ember MaterialInstalling the Trim Placing the Ember Material Positioning the LogsModel 6000TR Glass Assembly Double-check for gas leaks Double-check for faulty componentsStep Before Lighting Fireplace After InstallationMaintaining and Servicing Your Fireplace Fireplace MaintenanceBurner Flame Patterns Standing Pilot with Robertshaw Controls only Replacement Parts AccessoriesPart Part Description Part Number Standing Pilot with S.I.T. controls onlyBoth Standing Pilot and DSI Ignition DSI Ignition Only6000ARCH 22 X 22 X6000XLS 22 X 6000XLT-CDN 22 XAccessory Part Description Part Number

6000TR, 6000XLT-CDN, 6000XLS, 6000ARCH specifications

The Heat & Glo LifeStyle 6000 series offers a modern approach to home heating with its sleek designs and advanced technologies. The models within this series, including the 6000XLT-CDN, 6000TR, 6000XLS, and 6000ARCH, are designed for versatility and performance, catering to various aesthetic preferences and functional needs.

One of the standout features of the LifeStyle 6000 line is its linear design, which provides a contemporary aesthetic that fits seamlessly into any room. The 6000XLT-CDN model features a narrow, linear shape, making it an eye-catching centerpiece while providing efficient heating. The 6000TR offers a traditional configuration, with a classic appeal that remains timeless. The 6000XLS takes it a step further by incorporating an elongated view, while the 6000ARCH incorporates an arch design that adds architectural elegance.

Each model is equipped with Heat & Glo’s advanced LED lighting technology, which enhances the visual impact of the flames and creates a warm ambiance. This technology not only provides better illumination but also increases energy efficiency, allowing homeowners to enjoy the soothing glow without excessive energy consumption.

The series is also noted for its Smart Home compatibility, allowing users to control their fireplaces remotely through mobile devices. This feature adds convenience, enabling homeowners to adjust settings, monitor performance, and even program their fireplaces to suit their schedules.

Safety is paramount, and these models come equipped with advanced safety features, including a child lock and automatic shut-off systems. This ensures peace of mind for families while maintaining an inviting atmosphere.

Additionally, the LifeStyle 6000 series supports a range of fuel options, including gas and ethanol burners, providing flexibility according to user preferences and needs. With adjustable flame height and fan speed, users can customize their heating experience to match their comfort levels.

In summary, the Heat & Glo LifeStyle 6000 series blends style with functionality. With its modern designs, cutting-edge technology, and safety features, it provides a luxurious and efficient heating solution that enhances any living space. Whether you’re seeking a contemporary focal point or a traditional warmth, the 6000 series offers models that meet diverse needs while delivering exceptional performance.
Top Page Image Contents