White Rodgers 1F95W-71 manual Entering Your Program, Set Current Time and Day

Page 24

ENTERING YOUR PROGRAM

Follow these steps to enter the heating/cooling program you have selected.

NOTE

We recommend that you remove the thermostat from the wall for programming (especially for entering cooling programming). A fresh 9 volt Energizer® alkaline battery must be installed to

perform off-wall programming. USE	SYSTEM	TO
	HEAT - OFF - COOL - AUTO

TURN THE THERMOSTAT OFF BEFORE RE- ATTACHING THE THERMOSTAT TO THE SUBBASE!

You cannot program the thermostat with the SYSTEM SWITCH in the AUTO position.

Set Current Time and Day

1. Press SET once. The display will show

CLOCK

minutes only.

EXAMPLE:

2. Press and hold either TIMEFWD or BACKTIME until you reach the correct minutes.

3. Press SET once. The display window will

CLOCK

show the hour only.

EXAMPLE:

4. Press and hold either TIMEFWD or BACKTIME until you reach the correct hour and AM/PM desig- nation (AM begins at midnight; PM begins at noon).

24

Image 24

Contents 1F95W-71 About Your New Thermostat Questions and Answers Your NEW ThermostatsOperating Your Thermostat Your NEW THERMOSTAT’S Features Use To turn thermostat OFF beBack of The Thermostat Body To turn the thermostat OFFBack of Thermostat Body Display System Thermostat Buttons On Auto Operating Features TWO Hour Temperature Over Convertibility Press TimeTo return to your program Page Total Keypad Lockout Partial Keypad Lockout Programming Your Thermostat Your Home Factory Preprogramming Heat a Heat B Cool a Cool B Heating/Cooling Schedule Plan Sample Entering Your Program Set Current Time and DayProgram Heating and Cooling Temperatures Gramming after this happens, press Prgmview untilProgram Heating/Cooling Times Heating Temperatures Press until PRG FAN is displayed Below, or press DAY ADV Until the correct day’s Program Cooling Temperatures Operation. USETo Turn SYS TEM OFF Before Reattaching Thermostat to SubbaseUsing The Copy Button Complete until Holdcopy has been pressed TwiceCheck Your Programming Until OFF is displayed. Reattach Until you reach Programming Your ThermostatProgramming, press Prgm UntilWhy can’t I program the thermostat in the Auto mode? ING Your ThermostatGramming Your Thermostat Thermostat immediately, press System Display is flashing BATTERY. What does this mean? Ating Your ThermostatSee Operating Your THERMO- Stat Why is the system turning on and off so frequently seldom? Programming Your THERMO- StatMode you want, then press RUN to start Part No -5521A