White Rodgers 1F95W-71 manual Gramming Your Thermostat, See Operating Your THERMO- Stat

Page 37

!CAUTION

If the outside temperature is below 50°F,

DO NOT use the button to move the temperature below the setpoint tempera- ture. Property damage may result due to compressor slugging.

11.Why doesn’t the temperature change at the time I programmed?

There may be a number of causes for this situation. The following are primary rea- sons.

•The EMR function is operating. The EMR function will bring on the system auto- matically to bring the temperature to the selected level by the beginning of the next program period. See OPERATING YOUR THERMOSTAT.

•You have programmed the incorrect day or time. Check your programming (be sure that the times you programmed are correct AM or PM times). See PRO-

GRAMMING YOUR THERMOSTAT.

•The thermostat is in the HOLD mode.

Press RUN to start program operation.

PRGM

See OPERATING YOUR THERMO- STAT.

•The compressor lockout feature is oper- ating; wait about 5 minutes for system to begin running. See OPERATING YOUR THERMOSTAT.

37

Image 37

Contents 1F95W-71 About Your New Thermostat Your NEW Thermostats Questions and AnswersOperating Your Thermostat Your NEW THERMOSTAT’S Features To turn thermostat OFF be UseTo turn the thermostat OFF Back of The Thermostat BodyBack of Thermostat Body Display System Thermostat Buttons On Auto Operating Features Convertibility Press Time TWO Hour Temperature OverTo return to your program Page Total Keypad Lockout Partial Keypad Lockout Programming Your Thermostat Your Home Factory Preprogramming Heat a Heat B Cool a Cool B Heating/Cooling Schedule Plan Sample Set Current Time and Day Entering Your ProgramGramming after this happens, press Prgmview until Program Heating and Cooling TemperaturesProgram Heating/Cooling Times Heating Temperatures Press until PRG FAN is displayed Below, or press DAY ADV Until the correct day’s Operation. USE Program Cooling TemperaturesTo Turn SYS TEM OFF Before Reattaching Thermostat to SubbaseComplete until Holdcopy has been pressed Twice Using The Copy ButtonCheck Your Programming Until OFF is displayed. Reattach Programming Your Thermostat Until you reachProgramming, press Prgm Until ING Your Thermostat Why can’t I program the thermostat in the Auto mode? Gramming Your Thermostat Thermostat immediately, press System Ating Your Thermostat Display is flashing BATTERY. What does this mean?See Operating Your THERMO- Stat Programming Your THERMO- Stat Why is the system turning on and off so frequently seldom?Mode you want, then press RUN to start Part No -5521A