Now look at the factory preprogrammed times and temperatures shown below. If this program
will suit your needs, simply press PRGMRUN to begin
79
78
77
76
75
74
73
COOLING TEMPERATURES DEAD BAND 1°F
HEATING TEMPERATURES
running the factory preset program.
If you want to change the preprogrammed times and temperatures, do the following.
NOTE
To operate properly in the AUTO mode, there must be a minimum 1°F separation between the highest heat temperature and the lowest cool temperature (see diagram at right).
Determine the time periods and heating and cooling temperatures for your weekday pro- gram. You must program 4 periods for each day (MOR, DAY, EVE, and NHT). However, you may use the same heating and cooling tempera- tures for consecutive time periods. You can choose start times, heating temperatures, and cooling temperatures independently for both
FACTORY PREPROGRAMMING
Heating Program for ALL days of the Week:
PERIOD | TIME | TEMP |
MOR | 5:00 AM | 70 |
DAY | 9:00 AM | 70 |
EVE | 4:00 PM | 70 |
NHT | 10:00 PM | 64 |
Cooling Program for ALL Days of the Week:
PERIOD | TIME | TEMP |
MOR | 5:00 AM | 78 |
DAY | 9:00 AM | 82 |
EVE | 4:00 PM | 78 |
NHT | 10:00 PM | 78 |
21