QUESTIONS AND ANSWERS
1.How can I permanently change a part of my program?
Press PRGMVIEW until you reach the time/tempera- ture schedule you want. Then press TIMEFWD or
BACKTIME and 
and 
to change the
program. See PROGRAMMING YOUR THERMOSTAT.
2.How can I have no change in tempera- ture from one time period to another?
Simply select the same temperature for each consecutive time period. For example, you may select the same weekday EVE cooling temperature as you did for weekday DAY, which means the temperature will not
change when the EVE period begins. See
PROGRAMMING YOUR THERMOSTAT.
3.How can I finish my programming if the display has already changed to time/ temperature?
During programming, if no buttons are pressed for five minutes, the thermostat will enter the HOLD mode and maintain a con- stant temperature. The display will change to the time/temperature mode. To resume
programming, press PRGMVIEW until you return to
the point where you stopped programming. Then you may continue to program the thermostat normally. If you want to stop
programming at this point, press PRGMRUN to start
29