White Rodgers 700 Thermostat Buttons and Switches, Display, Operating Features, From Third

Page 4

5 CHECK THERMOSTAT OPERATION

CONTINUED FROM THIRD PAGE

Before you begin using your thermostat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. Your thermostat consists of two parts: the thermostat cover and the base. To remove the cover, gently pull it straight out from the base. To replace the cover, line up the cover with the base and press gently until the cover snaps onto the base.

The Thermostat Buttons and Switches

1(Up arrow) Raises temperature setting.

2(Down arrow) Lowers temperature setting.

3 FAN switch (ON, AUTO).

4 SYSTEM switch (COOL, OFF, HEAT).

The Display

5 is displayed when the SYSTEM switch is in the HEAT

position. is displayed (non-flashing) when the SYSTEM

switch is in the COOL position. is displayed (flashing) when the compressor is in lockout mode.

6Displays current temperature.

7“LO BATTERY” is displayed when the 2 “AAA” batteries are low and should be replaced. Nothing else will be displayed.

8Displays currently set temperature (this is blank when SYSTEM switch is in the OFF position).

Operating Features

Now that you are familiar with the thermostat buttons and display, read the following information to learn about the many features of the thermostat.

SIMULTANEOUS HEATING/COOLING SETPOINT STOR- AGE — You can enter both your heating and cooling setpoints at the same time. There is no need to re-enter the thermostat at the beginning of each season.

TEMPERATURE SETTING — Press or until the display shows the temperature you want. The thermostat will keep the room temperature at the selected temperature.

° F/° C CONVERTIBILITY — The factory default setting is Fahrenheit. Clipping W904 jumper on the circuit board (see fig. 1) will alter this feature to Celsius temperature setting.

LOW BATTERY INDICATOR — If the 2 “AAA” alkaline batteries are low and should be replaced, the display will be blank except for “LO BATTERY”. When the batteries are low, pressing any button will cause the display to operate for ten seconds. After ten seconds, the display will be blank except for

LO BATTERY”. After “LO BATTERY” has been displayed for 4 weeks, the thermostat will raise the temperature 10° above your setpoint in COOL mode and drop the temperature 10° below your setpoint in HEAT mode. You cannot program with low batteries, but you can override setpoint temperature.

1

2

WHITE-RODGERS

FAN SYSTEM

ON AUTO COOL OFF HEAT

3 4

6

8

75

Figure 8. Thermostat display, buttons, and switches

TEMPERATURE DISPLAY ADJUSTMENT — Your new thermostat has been accurately set in our factory. However, if you wish, you may adjust your new thermostat temperature

display to match your old thermostat. This can be accom- plished (within a ± 3° range) as follows:

1.Press or at the same time for two seconds with the SYSTEM switch in OFF position.

2.Press or to adjust the displayed temperature to your desired setting.

3.Move SYSTEM switch from OFF to exit the feature.

DISPLAY BACKLIGHT — (Not available on earlier models.) The display backlight improves display contrast in low light- ing conditions. Selecting backlight ON will turn the light on for a short period of time after any button is pressed. Selecting backlight OFF (default) will keep the light off. Turn the display backlight feature ON as follows:

1.Pressandat the same time for two seconds with the SYSTEM switch in HEAT position. The display will alternately show “-L”AND “FF” (off).

2.Press or to change “FF” to “ON”.

3.Move SYSTEM switch to OFF to exit the feature.

www.white-rodgers.com

Image 4
Contents Contents Your Thermostat ReplacesPreparations Thermostat DetailsMounting and Wiring Battery LocationElectric Heat or Single-Stage Heat Pump Systems Hydronic Hot Water or Steam Heating SystemsCheck Thermostat Operation Fan OperationCooling System Heating SystemThermostat Buttons and Switches Operating FeaturesDisplay From ThirdSpecifications TroubleshootingSymptom Possible Cause Corrective ActionSymptom Possible Cause Corrective Action From Fifth

700 specifications

The White Rodgers 700 series thermostats are an exemplary fusion of innovation, reliability, and user-friendly design, making them a popular choice for heating and cooling control in residential and commercial environments. Known for their advanced features, these thermostats cater to diverse heating and cooling systems, ensuring optimal temperature management and energy efficiency.

One of the standout features of the White Rodgers 700 series is its digital display, which offers clear visibility of temperature settings and system status. This intuitive interface allows users to easily navigate through various functions, enabling quick adjustments to heating and cooling preferences. The large, backlit display is particularly beneficial for users in low-light conditions, providing visibility without straining the eyes.

The 700 series is equipped with smart technology that enhances its usability. Many models feature programmable settings that allow users to customize their heating and cooling schedules based on their daily routines. This programmability can lead to significant energy savings, as the thermostat can automatically adjust settings during times when the home is unoccupied or when more efficient temperatures are desired.

Moreover, the White Rodgers 700 series incorporates advanced climate control technologies that optimize system performance. Features like adaptive recovery technology ensure that the desired temperature is reached as efficiently as possible without overshooting, thereby maintaining comfort while minimizing energy waste. This technology helps prolong the lifespan of HVAC systems by reducing wear and tear from constant cycling.

Compatibility is another significant advantage of the White Rodgers 700 series. These thermostats can work with a wide range of heating and cooling systems, including conventional, heat pump, and gas systems. This versatility makes them ideal for homeowners looking to upgrade their thermostat without the need for expensive alterations to their existing HVAC infrastructure.

In terms of security, some models within the series offer lockout features, providing peace of mind for users by preventing unauthorized changes to the temperature settings. This is particularly useful in settings where many individuals have access to the thermostat.

Maintenance reminders and filter change alerts are other essential characteristics of the 700 series, encouraging users to perform regular upkeep, which ultimately contributes to the longevity and efficiency of their HVAC systems.

Overall, the White Rodgers 700 series thermostats exemplify modern temperature control technology, combining user-friendly interfaces, smart features, and compatibility with various HVAC systems to deliver a reliable solution for temperature management. With their energy-saving capabilities, these thermostats not only enhance comfort but also support sustainable living through efficient energy usage.