Elitegroup PV-28SV55-(CN,CP,GN,GP)-1 Pvct Colinear Transition Vent KIT, Horizontal Application

PVCT COLINEAR TRANSITION VENT KIT

Available from Empire Comfort Systems, Inc.

Colinear Transition Plate

Note: Exhaust must be a minimum of 3” above air intake inlet.

OPTIONAL EXHAUST CAP

MODEL PVVTC

ORDER SEPARATE

AIR INTAKE

PTRAP OR 2 90° ELBOWS

SUPPLIED BY INSTALLER

PVC CEMENT

3” MIN.

PVC CEMENT

HEIGHT (MIN. 12”)

TRANSITION PLATE

OUTDOOR SEALER REQUIRED

EXHAUST

PTRAP OR 2 90° ELBOWS

SUPPLIED BY INSTALLER

AIR INTAKE

PTRAP OR 2 90° ELBOWS

SUPPLIED BY INSTALLER

PVC CEMENT

3” MIN.

PVC CEMENT

HEIGHT (MIN. 12”)

TRANSITION PLATE

OUTDOOR SEALER REQUIRED

Flat Roof or Chimney Application

1.Attach plate to chimney chase or flat roof with four (4) screws. Use outdoor sealant to seal transition plate to the roof or chimney chase.

2.Check local codes to determine air intake height from roof. The minimum height for this application is 12”.

3.Cut 1 1/2” PVC pipe to correct height. Attach pipe, PTrap, and exhaust cap to plate. Glue all joints with PVC cement.

Note: Must maintain a minimum 3” between exhaust outlet and air intake.

Horizontal Application

1.Attach plate to outside wall with four (4) screws. Use outdoor sealant to seal transition plate to the wall.

2.Cut 1 1/2” PVC pipe to correct length. The minimum length for this application is 9” for the exhaust and 6” for the air intake. Glue all joints with PVC cement.

22618-12-0707 Page 29