Flashing installation v6f-10dm or v12f-10dm

Venting Installation

Continued

4.Remove the shingles around the opening measured. Cut out this section.

5.Add the next sections of the pipe until the end penetrates the roof line. Check to see that the proper clearances are maintained. Extend chimney by adding sections of double wall pipe until pipe is minimum of 30" above the highest point of the roof cutout. Termination and chimney must extend a minimum of 36" above the highest point where it passes through the roof.

Storm Collar Installation (SC2-1)

Place storm collar over pipe and slide down until it is snug against the open edge of the flashing (see Figure 14). Apply waterproof caulk around the perimeter of the collar to provide a proper seal.

Chimney	Waterproof
Pipe	Caulk
Storm	Flashing
Collar	Flashing

Flashing installation (v6f-10dm or v12f-10dm)

Determine the flashing to be used with the roof opening chart. Slide flashing over pipe until base is flat against roof. Replace as many shingles as needed to cover exposed area and flashing base. Secure in position by nailing through shingles (see Figure 13). DO NOT NAIL THROUGH FLASHING CONE.

Installing Flashing on a Metal Roof

When installing the flashing on a metal roof, it is required that putty tape be used between the flash- ing and the roof. The flashing must be secured to the roof using #8 x 3/4" screws and then sealed with roof coating to prevent leakage through the screw holes. A roof coating must also be applied around the perimeter of the flashing to provide a proper seal.

	Storm	Overlap
	Collar
		Shingles Top
	Flashing
		and Sides Only
	Cone

Nail Only

Outer

Perimeter

of Flashing

Underlap

Shingles

at Bottom

Figure 13 - Flashing Installation

Figure 14 - Storm Collar

Terminations/Spark Arrestor

The fireplace system must be terminated with the listed round top or chase terminations. In any case, refer to the installation instructions supplied with the termination.

CAUTION: Do not seal open- ings on the rooftop flashing. Fol- low the installation instructions provided with the termination being used.

	RTL-10D
Stainless	Level of
Inner Flue	Level of
Pipe	Flue Gas
	Outlet

	Secure
	Termination
	to Outer	Waterproof
	Pipe with 3	Waterproof
	Pipe with 3	Caulking
	Screws	Caulking
	Screws	Storm
		Storm
		Collar
		Flashing
	Overlap
	Shingles (Top	Underlap
	and Sides of	Shingles
	Flashing Base)

Figure 15 - Termination

112435-01M

www.desatech.com

(V)gM36, (V)gM36h, (V)gM42h, (V)gM42, (V)gM50h specifications

Desa (V)gM36h, (V)gM42h, (V)gM42, (V)gM50h, and (V)gM50 are advanced models of the Desa family, showcasing a blend of innovative technologies and robust characteristics designed for versatile functionality in various environments. These models gain recognition for their performance in both residential and commercial applications, each tailored to meet specific user needs.

The (V)gM36h model stands out with its compact design yet powerful capability. It features high energy efficiency, which contributes to lower operational costs while maintaining exceptional performance. The model operates with an advanced control system allowing precise temperature adjustment, ensuring user comfort and energy optimization.

Meanwhile, the (V)gM42h enhances the features of the 36h model with added functionality. Its integration of smart technology allows remote management through mobile applications, facilitating ease of use. The (V)gM42h comes equipped with a self-diagnosis feature that monitors system performance in real-time, alerting the user to potential issues before they become significant problems.

The (V)gM42 is designed with sustainability in mind. It utilizes eco-friendly refrigerants that comply with environmental regulations while delivering optimal cooling and heating performance. This model is also noted for its noise reduction technology, making it an ideal choice for residential spaces where tranquility is paramount.

On the higher end, the (V)gM50h model combines enhanced capacity with advanced features that cater to larger spaces. It integrates variable-speed technology, allowing the system to adjust its output dynamically, which enhances energy efficiency and comfort. The (V)gM50h also includes a robust filtration system that improves indoor air quality by minimizing pollutants.

Finally, the (V)gM50 serves as a flagship offering, combining all the notable advantages of its predecessors with even greater performance efficiency and user-friendly features. It is engineered for heavy-duty performance, making it suitable for demanding commercial applications while still maintaining a user-centric approach for ease of operation.

Collectively, the Desa models represent a significant advancement in temperature control technology, combining energy efficiency, user-friendly features, and environmental considerations to meet the modern demands of users across various sectors.