Desa CGCF26PRA installation manual Assembly, Assembling Fireplace, Installing Log, Assembling Hood

Page 4

VENT-FREE PROPANE COMPACT FIREPLACE

ASSEMBLY

WARNING: Always have branch support and screen in place before operating fireplace. This prevents excessive tempera- tures on fireplace surfaces.

ASSEMBLING FIREPLACE

Tools Required:

Phillips screwdriver,

5/16" hex wrench

Slotted screwdriver

Installing Log

1.

Remove back log, branch, and hood from

 

log box. Discard protective packaging.

2.

Remove two shipping screws above

 

screen (see Figure 2).

3.

Lift screen up and pull out to remove.

4.

An optional blower is available. See

 

Accessories, page 24. Install optional

 

blower now. Follow installation in-

 

structions provided with blower.

Screen Shipping Screw

Shoulder Screw

Back Log

Burner

Support

Screw

Branch

Branch Support

Screw

Screen

5.

Gently place back log on burner sup-

 

port (see Figure 2). The log should fit

 

flat against top of burner support. Place

 

two #10 one-inch-long screws through

 

burner support into the log and tighten.

 

Place branches on branch support (see

 

Figure 2).

6.

Do not allow branch to contact flame.

 

If flame contacts branch, soot will be

 

created.

7.

Reattach screen by placing notches in

 

screen frame over shoulder screws and

 

pushing down.

Figure 2 - Assembling Fireplace

Assembling Hood

1.Locate four #10-3/8" black phillips sheet metal screws from the hardware packet.

2.Remove two 1 3/4" screws from under- neath middle rail (see Figure 3).

3.Slip top of hood between middle rail and top of firebox wrapper (see Figure 3).

4.Reinstall two 1 3/4" screws removed in step 2. Make sure screw pass through hood and middle rail and attach into upper louver assembly (see Figure 3).

5.Attach four #10-3/8" hood screws as shown in Figure 3.

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this fireplace may result in prop- erty damage or personal injury.

Middle Rail

Hood

Firebox Top

2 Short

Screws

1 3/4" Screws

Figure 3 - Assembling Hood

4

105616

Image 4
Contents VENT-FREE PROPANE/LP GAS Compact Fireplace What to do if YOU Smell GASSafety Information VENT-FREE Propane Compact FireplaceProduct Features Remote Control AccessoriesProduct Identification Local CodesAssembly Installing LogAssembling Fireplace Assembling HoodAIR for Combustion and Ventilation Providing Adequate VentilationUnusually Tight Construction Confined and Unconfined SpaceDetermining FRESH-AIR Flow for Fireplace Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Installation Installation ItemsCheck GAS Type Locating FireplaceBUILT-IN Fireplace Installation DepthOptional Mantel Installation Mantel Clearances for BUILT-IN InstallationAssembling Brass Trim Brass trim shipped with mantel Connecting to GAS Supply Attaching Wood Base to Solid FloorConnecting Fireplace to GAS Supply Installation Items NeededPressure Testing Fireplace Gas Connections Pressure Testing Gas Supply Piping SystemChecking GAS Connections Installing Receiver Installing 9-Volt Battery in Hand- Held Remote Control UnitOperating Fireplace For Your Safety Read Before LightingLighting Instructions To Turn OFF GAS To Appliance Manual Lighting ProcedureOptional Remote Operation Cleaning and Maintenance Inspecting BurnersReplacement Parts SpecificationsTechnical Service Service HintsTroubleshooting Observed Problem Possible Cause RemedyMaintenance, Top Illustrated Parts Breakdown CGCF26PRAParts List KEY Description QTYAccessories Parts Centrals Halco EnterprisesWarranty Information

CGCF26PRA specifications

Desa CGCF26PRA is a modern heater that combines advanced technology with user-friendly features to deliver efficient warmth for home and outdoor spaces. This product is particularly known for its reliability and performance as a convection heater.

One of the standout features of the Desa CGCF26PRA is its powerful 26,000 BTU output, enabling it to effectively heat large areas quickly. This makes it an ideal choice for both residential and commercial applications, especially during the colder months when efficient heating solutions are critical. The heater is designed to operate on liquid propane, which is both cost-effective and readily available, ensuring users can keep their environments comfortably warm without breaking the bank.

In terms of technology, the Desa CGCF26PRA is equipped with an electronic ignition system that provides a reliable start-up with the push of a button. This modern feature eliminates the need for matches or lighters, enhancing convenience and safety. Additionally, the heater is built with safety features such as a safety shut-off valve, which automatically turns off the gas supply in the event of a malfunction, ensuring peace of mind for users concerned about safety.

The design of the Desa CGCF26PRA facilitates easy mobility, thanks to its lightweight construction and integrated handle. It features a compact size that allows it to fit effortlessly in various spaces, whether it's a garage, workshop, or outdoor setting. The heater also has a versatile design that complements a wide range of environments without being an eyesore.

Furthermore, the heater operates quietly, which is an essential characteristic for maintaining a comfortable atmosphere without disruptive noise. Its durable construction ensures longevity, even when subjected to regular use in demanding conditions.

In conclusion, the Desa CGCF26PRA heater stands out for its robust heating capability, modern ignition technology, safety features, portability, and quiet operation. These characteristics make it an excellent investment for anyone in need of an effective heating solution for various settings and applications.