Selecting Location, Mantel Clearances | Desa CD32M (-1)(-2) specs

SELECTING LOCATION PRE-INSTALLATION PREPARATION

Clearances to Combustibles

Mantel Clearances

SELECTING LOCATION

To determine the safest and most efficient location for your fire- place, consider the following guidelines:

1.The location must allow for proper clearances (see Figure 1).

2.Consider a location where the firepace would not be affected by drafts, air conditioning ducts, windows or doors.

3.A location that avoids the cutting of joists or roof rafters makes ventilation installation easier.

In selecting a location, the following precautions must be observed:

•Do not connect this appliance to a chimney system used for solid fuel burning fireplace.

•Due to high temperatures, do not locate this appliance in high traffic areas or near furniture and draperies.

•Never obstruct the openings of the appliance or flow of ventila- tion air. Keep the control compartments accessible.

•Do not locate appliance close to where gasoline or other flam- mable liquids may be stored. The appliance must be kept clear and free from combustible materials.

•Do not use this appliance if any part has been under water. Imme- diately contact a local service technician to examine the appli- ance and to replace any part(s) of the control ignition system and other related components that have been submerged under water.

PRE-INSTALLATION

PREPARATION

CAUTION: Do not block required air spaces with insulation or any other material. Do not obstruct the effective opening of the appliance with any type of facing material.

CLEARANCES TO COMBUSTIBLES

Minimum clearances to combustibles for the fireplace are:
• Back and Sides of Fireplace		0"
•	Floor	0"
•	Perpendicular Wall	6"
•	Front	36"
•	Top of Standoffs	0"

MANTEL CLEARANCES

Woodwork, such as wood trims, mantles, and other combustible materials should be placed within the required clearance specified in Figure 2.

FULL

PROJECTION

CORNER

INSTALLATION

FLUSH

INSTALLATION

Figure 1 - Common Fireplace Locations

Flush installation is recommended where living space is limited.

Projected installation may be ideal for a new addition to an existing finished wall.

Corner installation makes use of a space that may not normally be used and provides a wider and more efficient range for radiant heat transfer.

			1
			2
			3
A			Wall
			Wall
			4
B			5
	C		6
			6
		D
		E	7
			7
			F
			G
		Top of Louver Opening

Mantel		Mantel From Top
Depth		of Opening

(1)	14"	(A) 16"
(2)	12"	(B) 14"
(3)	10"	(C) 12"
(4)	8"	(D) 10"
(5)	6"	(E) 8"
(6)	4"	(F) 6"
(7)	2"	(G) 4"

Figure 2 - Mantel Clearances

For..com

111916-01C

CD32M (-1)(-2) specifications

Desa CD32M (-1)(-2) is a cutting-edge technology designed to meet the demands of modern applications, particularly in the realm of telecommunications and data processing. This sophisticated dual-mode digital system offers versatility and efficiency, making it suitable for various industries including finance, healthcare, and manufacturing.

One of the main features of the Desa CD32M is its advanced processing capability. With a dual-core architecture, it can handle multiple tasks simultaneously, greatly enhancing performance in complex environments. This multi-threading capability allows for improved response times and higher productivity, which is critical for applications that require real-time data analysis and processing.

The Desa CD32M incorporates innovative technologies such as dynamic power management and adaptive processing algorithms. These technologies enable the system to efficiently allocate resources based on task priority, minimizing energy consumption without sacrificing performance. This aspect is particularly important in industries where sustainability and cost-effectiveness are paramount.

Another standout characteristic of the Desa CD32M is its robust security features. With integrated encryption and authentication protocols, it ensures that sensitive information is protected from unauthorized access and cyber threats. This level of security is essential for sectors like finance and healthcare, where data integrity and privacy are critical.

In addition to its hardware capabilities, the Desa CD32M is built for compatibility with a wide range of software platforms. This flexibility allows organizations to integrate the system into their existing workflows seamlessly. Its user-friendly interface also facilitates easier control and monitoring, making it accessible for users with varying levels of technical expertise.

Moreover, the scalability of the Desa CD32M sets it apart from conventional systems. Organizations can expand their operations and upgrade their capabilities without the need for a complete overhaul of their existing infrastructure. This scalability is particularly advantageous in today’s fast-paced business environment, where adaptability is crucial.

Overall, the Desa CD32M (-1)(-2) represents a significant advancement in digital systems technology. Its combination of processing power, energy efficiency, robust security, and scalability makes it an invaluable asset for organizations looking to enhance their operational efficiency while ensuring data protection. As industries continue to evolve, technologies like the Desa CD32M will play an essential role in shaping the future of digital communication and data management.