Desa MSVFBNR Series installation manual Installing GAS LOG Heater Into Stove

Page 10

SUN VALLEY STOVE COMPANY

VENT-FREE NATURAL GAS STOVE HEATER

INSTALLATION

Continued

INSTALLING GAS LOG HEATER INTO STOVE

CAUTION: Do not remove the metal data plates attached to the heater base assembly. The data plates contain important warranty information.

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

CAUTION:Afterinstallationand periodically thereafter, check to en- surethatnoflamecomesincontact with any log. With the heater set to High, check to see if flames contact any log. If so, reposition logs ac- cording to the log installation in- structions in this manual. Flames contacting logs will create soot.

1.Remove log and gas log heater from carton. Note: Do not pick up gas log heater by the burner itself. This could damage heater. Always handle the gas log heater by the heater base only.

2.Remove all protective packaging ap- plied to log and gas log heater for ship- ment.

3.Check all items for any shipping dam- age. If damaged, promptly inform dealer where you bought heater.

4.If not already removed, remove back panel from assembled stove body (see Figure 5, page 8). Use an adjustable wrench or a 10 mm socket. Remove six

(6) bolts and washers. Keep bolts and washers to reattach back panel later.

5.Set gas log heater inside stove. Make sure control knob extension passes through bottom front opening (see Fig- ure 13).

6.Align outside holes on heater base with four (4) mounting holes on the stove bottom (see Figure 13).

7.Fasten heater base to stove bottom with #10-24 x .50 bolts and hex nuts pro- vided with gas log heater (see Figure 14). Attachment hardware is factory packed inside plastic bag with installa- tion manual and owner’s registration card. Push bolt through heater base mounting hole and through stove bot- tom. Connect hex nut to bolt on under- side of stove bottom. The bolt hex head is for a 5/16" socket and the hex nuts are for a 3/8" socket. If sockets are not available, use adjustable wrenches.

8.Set one-piece log on heater base as shown in Figure 15. Make sure middle section at bottom of log is seated into "U" shaped cutout in center of heater base. Log will fit securely on base.

IMPORTANT: Make sure log does not cover any burner ports and does not touch the stove cavity (see Figure 16).

9.Fasten back panel to stove with six (6) M6 x 1.20mm bolts and washers. Make sure product identification label is located on the outside lower left-hand corner. Note: Do not overtighten bolts. Porce- lain on back panel may crack.

10.Place freestanding stove in desired po- sition in room. Be sure to maintain clearances to combustibles as outlined on page 7.

Bottom

Front

Opening

 

 

Burner

Bolt

Heater

Stove Bottom

 

Base

 

 

Figure 13 - Placing Heater Base In Stove Cavity (Appearance May Vary Depending on Model)

 

 

 

 

Heater

Bolt

 

 

Base

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stove

Hex Nut

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bottom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 14 - Fastening Heater Base to Stove Drop Bottom

One-Piece

Log Set

Middle

Section at

Bottom of

Log Set

Burner

"U" Shaped

Cutout in

Chassis

Heater Base

Figure 15 - Installing One-Piece Stove

Log Set (Remote-Ready Log Heater

Shown)

Burner Porting Areas (double slotted rectangular openings

Safety Pilot Location

One-Piece

Log Set

 

Figure 16 - Top View of One-Piece Log Set on Gas Log Heater

For more information, visit www.desatech.com

10

105985

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASSafety Information SUN Valley Stove CompanyProduct Identification Product FeaturesLocal Codes Unusually Tight Construction AIR for Combustion and VentilationProviding Adequate Ventilation Confined and Unconfined SpaceDetermining FRESH-AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Building Ventilation AIRVentilation Air From Inside Ventilation Air From OutdoorsClearances to Combustibles InstallationCheck GAS Type Vent-Free Operation OnlyStove Cavity Assembly Lift off corrugated box enclosing stove body cratingAttaching Stove Legs Installing GAS LOG Heater Into Stove Fastening Heater Base to Stove Drop BottomConnecting to GAS Supply Installation Items NeededPressure Testing Gas Supply Piping System Pressure Testing Heater Gas ConnectionsChecking GAS Connections Installing Optional Wall Mounted Thermostat GWMT1 Installing Optional Wireless HAND-HELD Remote ControlOperating Heater For Your Safety Read Before LightingLighting Instructions Msvfbnr REMOTE-READY Models To Turn OFF GAS To Appliance Manual Lighting ProcedureOptional Remote Operation Lighting Instructions Msvfbn Manual VARIABLE-CONTROL Models Variable Control OperationBurner Primary AIR Holes Inspecting BurnersPilot Flame Pattern Main BurnerLogs Cleaning and MaintenanceCleaning Burner Injector Holder and Pilot AIR Inlet Hole Transporting StoveTroubleshooting Observed Problem Possible CauseObserved Problem Possible Cause Remedy Top Wiring Diagram Specifications Service Hints Replacement PartsTechnical Service Parts Under WarrantyAccessories Illustrated Parts Breakdown MsvfbnrParts List KEY Part Number Description QTYMsvfbn KEY Part Description QTY SUN Valley Stove SUN Valley Stove MC* Series Indicates Color Suffix DesignationSUN Valley Stove Mchp Series Hepplewhite Stove Design SUN Valley Stove Mchp Series Hepplewhite Stove DesignWarranty Information International

MSVFBNR Series specifications

The Desa MSVFBNR Series is a remarkable innovation in the realm of heating solutions, designed to cater to the diverse needs of both residential and commercial spaces. Built with the latest technology and user-centric features, the MSVFBNR Series stands out as a leading choice for individuals seeking efficient, reliable, and stylish heating options.

One of the standout features of the MSVFBNR Series is its Energy Star rating, which emphasizes its energy efficiency and environmentally friendly operation. By utilizing advanced combustion technologies, these units optimize fuel usage, reducing energy consumption and lowering utility bills. This eco-conscious design not only benefits the wallet but also contributes to a more sustainable future, making it an appealing choice for environmentally conscious consumers.

The MSVFBNR Series integrates state-of-the-art safety technologies to ensure peace of mind for users. With built-in safety shutoff mechanisms and automatic ignition systems, these heaters prioritize user safety. The incorporation of a thermal protection feature prevents overheating, providing a secure heating solution for families and businesses alike.

Ease of use is another hallmark of the MSVFBNR Series. The user interface is designed to be intuitive, allowing for seamless operation and customization. With programmable thermostats and remote control capabilities, users can easily adjust the heating schedule to suit their lifestyles. This adaptability not only enhances comfort but also promotes energy savings.

Durability is a key characteristic of the MSVFBNR Series, with robust construction materials designed to withstand the rigors of daily usage. The series features a sleek, modern design that seamlessly integrates into a variety of décor styles, making it a versatile addition to any space.

Finally, the MSVFBNR Series is available in a range of models and sizes, ensuring that there is a perfect fit for every application. Whether you need supplementary heat for a single room or a primary heating source for a larger space, the MSVFBNR Series offers tailored solutions to meet your requirements.

In conclusion, the Desa MSVFBNR Series combines cutting-edge technology, user-focused features, safety, and style, making it an ideal choice for those in search of a dependable heating solution. Its energy efficiency, ease of use, and durable construction solidify its position as a leader in the heating industry.
Top Page Image Contents