Desa MVO18VNA Wiring Diagram, To Turn OFF GAS To Appliance, Optional HAND-HELD Remote Operation

Page 11

OPERATING APPLIANCE

Continued

10.Wait one minute and move switch to the ON position to light burner. Note: AUTO is only functional when using optional remote control accessory.

11.Set flame adjustment knob to any level between HI and LO.

TO TURN OFF GAS

TO APPLIANCE

1.Push switch into OFF position. The pilot will remain lit for normal service.

2.Access control knobs.

3.Depress gas control knob slightly and turn clockwise to OFF. Do not force.

OPTIONAL HAND-HELD

REMOTE OPERATION

Note: Remote control accessory must be pur- chased separately (see Accessories, page 17). Follow instructions included with the remote control.

NOTICE: You must light the pilot before using the hand-held re- mote control unit. See Lighting Instructions on page 10.

After lighting, let pilot flame burn for about one minute. Turn control knob to ON posi- tion. Adjust flame adjustment knob anywhere between HI and LO. Flip AUTO/OFF/ON switch to AUTO. Slide the selector switch to the REMOTE position (see Figure 13). Note: The burner may light if hand-held remote was on when selector switch was last turned off. You can now turn the burner on and off with the hand-held remote control unit.

Control Knob

REMOTE

OFF

ON

IMPORTANT: Do not leave the selector switch in the REMOTE or ON position when the pilot is not lit. This will drain the battery.

ON/OFF SERIES (MODEL GHRCB)

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 14). To Lock press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed. To Unlock press both buttons together on hand- held remote control until the light stops flashing. The hand-held remote is now unlocked.

Control Button

Turns Burner

On and Off

Figure 14 - On/Off Hand-Held Remote Control Unit (GHRCB)

WIRING DIAGRAM

When Using Remote

To Remote

Receiver

Thermopile

Piezo Ignitor

Flame

Adjustment

Knob

Selector Switch in REMOTE Position

Figure 13 - Setting the Selector Switch,

Control Knob and Flame Adjustment

Knob for Remote Operation

114924-01B

www.desatech.com

11

Image 11
Contents MVO24VNA, MVO24VPA MVO18VNA and MVO18VPA What to do if YOU Smell GASTable of Contents Safety Information Provide adequate clearances around air openings Local CodesHigh traffic areas Windy or drafty areas Product Identification Product FeaturesInstallation Remove log set assembly from cartonInstallation Installation and ClearancesFlue Opening Specifications Venting Specifications forInstallation Items Needed Installing ApplianceConnecting to GAS Supply Test Pressures In Excess Of 1/2 Psig Checking GAS ConnectionsNatural Propane/LPTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Placement of Loose EmbersPressure Testing Appliance Gas Connections Lighting Instructions For Your Safety Read Before LightingOperating Appliance Optional HAND-HELD Remote Operation Wiring DiagramWhen Using Remote To Turn OFF GAS To ApplianceCheck pilot flame pattern and burner flame pat- terns often Cleaning MaintenanceInspecting Burners Pilot Flame PatternObserved Problem Possible Cause Remedy TroubleshootingReplace burner orifice Contact local natural orPilot is lit Burner orifices clogged Propane/LP gas company Replace burner orificesCold Minute Air is gas line Operate burners until air is Burners are lit Position when burners areOperation Processes and log curing Hours of operation Turn control knob to LOGas leak. See Warning statement at top Gas leak. See WarningStatement at top Replacement Parts Service HintsTechnical Service AccessoriesMVO24VNA, MVO24VPA MVO18VNA, MVO18VPA Illustrated Parts BreakdownParts List Limited Warranty Vented GAS LOG Appliances Warranty InformationKeep this Warranty

MVO24VPA, MVO18VNA, MVO18VPA, MVO24VNA specifications

Desa MVO18VPA, MVO24VPA, MVO18VNA, and MVO24VNA represent a line of versatile and efficient heating solutions designed for various residential and commercial applications. These models are tailored to meet diverse user requirements while providing exceptional value through advanced technologies and features.

At the core of the Desa line is the commitment to energy efficiency. The MVO series incorporates high-efficiency motors and advanced heat exchange systems that ensure optimal performance while minimizing energy consumption. This not only leads to cost savings on utility bills but also reflects a commitment to sustainability, making these models an excellent choice for eco-conscious consumers.

In terms of heating capacity, the MVO18 models offer a robust output suitable for medium-sized spaces, while the MVO24 models are designed for larger areas, providing flexibility for different applications. The ability to adjust heating levels allows users to customize their environment according to their specific needs, enhancing comfort.

The MVO series is equipped with innovative technologies that ensure consistent performance. The integration of intelligent temperature controls provides precise management of heating levels, enabling users to maintain their desired comfort without unnecessary energy expenditure. Additionally, these models feature durable construction materials that ensure longevity and reliable operation over time.

User convenience is a significant consideration in the design of the MVO series. Remote control functionality allows users to effortlessly adjust settings from a distance, adding a layer of convenience for those with busy lifestyles. Furthermore, some models are equipped with programmable timers, enabling users to set specific heating schedules that align with their daily routines.

Safety is paramount in the design of the Desa MVO series. These models come with multiple safety features, including overheat protection and automatic shut-off mechanisms, ensuring peace of mind for users.

In summary, the Desa MVO18VPA, MVO24VPA, MVO18VNA, and MVO24VNA heating models stand out for their energy efficiency, advanced heating technologies, and user-friendly features. Their adaptability makes them suitable for a range of environments, catering to the diverse needs of homeowners and businesses alike. With a focus on safety and reliability, the Desa MVO series represents an excellent investment for those seeking effective heating solutions.