INSTALLATION
Log Placement for M36E/VM36E Models
13
INSTALLATION
Continued
LOG PLACEMENT FOR M36E/VM36E MODELS
1.Place small front right log (log 1) on right front of grate as shown in Figure 23.
2.Place large back log (log 2) onto grate making sure notches rest over grate as shown in Figure 23.
3.Place log 3 across logs 1 and 2 aligning pegs on log 3 with holes in logs 1 and 2 (see Figure 24).
4.Place the top of log 4 across the right side of log 2, aligning peg in log 4 with hole in log 2 (Figure 24). Rest the front of log 4 on the grate as shown in Figure 25.
5.Align the peg at top of log 5 with the hole on the top left of log 2 (see Figure 25). Rest the bottom of log 5 on grate as shown in Figure 26.
6.Align peg at the top of log 6 with hole on the front left of log 2 (Figure 25). Rest the bottom of log 6 on grate as shown in Figure 26.
To enhance the look of the hearth you may optionally place the lava rock provided around the front and sides of the burner.
NOTICE: Do not put lava rock inside the burner pan or around the air mixer fitting. Placing lava rock inside the burner pan or blocking the openings of the propane/LP
Log 2
Log 1
Figure 23 - Installing Logs 1 and 2
Log 4
Figure 24 - Installing Logs 3 and 4
Log 5
Log 6
Figure 25 - Installing Logs 5 and 6
Log 3
Log 2
Log 1
Log 4
Log 3
Figure 26 - Logs Installed for M36E/VM36E Models
For more information, visit www.desatech.com
108796