Desa VI33NRB, VI33PRB Operating Fireplace Insert, For Your Safety Read Before Lighting

Page 19

OPERATING FIREPLACE

INSERT

FOR YOUR SAFETY READ

BEFORE LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result causing property damage, per- sonal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service tech- nician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a quali- fied service technician to inspect the appli- ance and to replace any part of the control system and any gas control which has been under water.

LIGHTING

INSTRUCTIONS

WARNING: You must oper- ate this heater with the fireplace insert screen in place. Make sure fireplace insert screen is in- stalled before running fireplace insert.

NOTICE: During initial operation of new fireplace insert, burning logs will give off a paper-burn- ing smell. Open damper or win- dow to vent smell. This will only last a few hours.

1.STOP! Read the safety information column 1.

2.Make sure equipment shutoff valve is fully open.

3.Set switch to OFF position.

WARNING: Burners will come on automatically within one minute when the remote se- lector switch is in the ON posi- tion after the pilot is lit.

4.Press in and turn control knob clockwise to the OFF position.

5.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information in column 1. If you don’t smell gas, go to the next step.

6.Press in and turn control knob counter-

clockwise to the PILOT position. Press in control knob for five (5) seconds (see Figure 32).

Note: You may be running this heater for the first time after hooking up to gas sup- ply. If so, the control knob may need to be pressed in for 30 seconds or more. This will allow air to bleed from the gas system.

Ignitor Button

IH

 

 

 

 

 

O

 

 

 

F

AUTO

N

 

F

O

 

P

OFF

LO

I

TOL

 

 

 

 

ON

Flame

Control

Selector Switch

Adjustment

Knob

 

Knob

 

 

Figure 32 - Control Knob and Ignitor

Button Location (Shown as Supplied, No

Control Options)

113195-01A

www.desatech.com

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents VI33NRB and VI33PRB Remote Ready GAS Fireplace Insert What to do if YOU Smell GASTable of Contents Safety Information Safety Information Product Identification Remote Control AccessoriesLocal Codes UnpackingAIR for Combustion Ventilation Product FeaturesConfined and Unconfined Space Determining FRESH-AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Outdoors InstallationVentilation AIR Ventilation Air From Inside BuildingElectrical Hookup Installing Surround KIT GS38 or GS43Blower Accessory Check GAS TypeRemoving Screws and Screen Installation Clearances Installing HoodInstallation Items Needed Installing GAS Piping to Fireplace LocationPropane/LP Connecting Fireplace Insert to GAS SupplyNatural Test Pressures In Excess Of 1/2 Psig 3.5 kPa Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Fireplace Insert Installation Into Masonry FireplaceAssembling and Attaching Trim Installing LogsInstalling Log Set Installing Remote Receiver Unit Installing 9-VOLT BatteriesInstalling 9-Volt Battery Not Included in Receiver Operating Fireplace Insert For Your Safety Read Before LightingLighting Instructions Shutting Off Heater Manual Lighting ProcedureTo Turn OFF GAS To Appliance Optional HAND-HELD Remote OperationON/OFF Series Model Ghrcb Manual ModeAuto Thermostatic Mode Safety FeaturesOptional Blower Operation Auto Shutoff FeatureKey Pad Lock Feature Inspecting BurnersMain Burner Cleaning MaintenanceBurner Flame Pattern Burner Primary AIR HolesLogs Wiring DiagramsObserved Problem Possible Cause Remedy TroubleshootingObserved Problem Possible Cause Remedy Ventilation requirements Gas leak. See Warning Gas leak. See Warning statement aboveStatement above Service Hints SpecificationsReplacement Parts Technical ServiceModels VI33NRB and VI33PRB Illustrated Parts BreakdownParts List Fireplace Insert Models VI33NRB and VI33PRB Magnet Catch Duplex Outlet KIT GA3555 Fire Crackle CF6-A Receiver and HAND-HELD Remote Control KIT Ghrcb SeriesEquipment Shutoff Valve GA5010 Information Video113195-01A Keep this Warranty Warranty InformationLimited Warranty VENT-FREE GAS Fireplace Insert

VI33NRB, VI33PRB specifications

Desa VI33NRB and VI33PRB are cutting-edge solutions designed to meet the growing demands of modern industries. These innovative products combine advanced technologies and features that enhance productivity, efficiency, and sustainability.

One of the main highlights of the Desa VI33NRB is its remarkable energy efficiency. This model employs state-of-the-art energy management systems that significantly reduce power consumption while maintaining optimal performance levels. The implementation of smart sensors allows for real-time monitoring of energy usage, enabling users to identify potential savings and optimize operational costs.

In contrast, the VI33PRB focuses on advanced data processing capabilities. It integrates robust computing power with sophisticated algorithms that facilitate high-speed processing of large data sets. This feature is particularly beneficial in sectors such as manufacturing, logistics, and telecommunications, where data analytics plays a crucial role in decision-making and strategic planning.

Beyond energy efficiency and data processing, both models incorporate eco-friendly technologies that align with sustainable practices. They utilize recyclable materials in their construction, promoting environmental responsibility. Furthermore, Desa has prioritized the reduction of carbon footprints across both product lines, ensuring compliance with international environmental standards.

Another significant characteristic of these models is their versatile connectivity options. Equipped with IoT capabilities, the VI33NRB and VI33PRB enable seamless integration with existing systems and networks. This adaptability allows organizations to harness the power of cloud computing, facilitating remote monitoring, maintenance, and updates.

User experience has also been a central focus in the design of these models. Intuitive interfaces and user-friendly control panels make it easy for operators to engage with the systems. Training requirements are minimized, allowing for a smooth transition and quick onboarding of new users.

Security features are paramount in today’s digital landscape. The Desa VI33NRB and VI33PRB incorporate advanced encryption technologies and secure authentication protocols to protect sensitive data from unauthorized access. This commitment to security ensures peace of mind for users as they implement these systems in their operations.

In conclusion, Desa VI33NRB and VI33PRB are exemplary models that showcase the intersection of technology, sustainability, and user-friendliness. Their energy-efficient designs, powerful data processing, eco-friendly technologies, versatile connectivity, and robust security measures position them as leaders in their respective markets, paving the way for a more efficient and sustainable future in industrial solutions.
Top Page Image Contents