Desa VI33NRB, VI33PRB Local Codes, Unpacking, Product Identification, Remote Control Accessories

Page 5

SAFETY INFORMATION

Continued

23.Refractory, glass doors, screen rails, screen mesh and solid-fuel log grates (if applicable) can be removed from the fireplace before in- stalling the unvented fireplace insert.

24.Smoke shelves, shields and baffles may be removed if attached by mechanical fasteners.

LOCAL CODES

Install and use fireplace insert with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code, ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

UNPACKING

CAUTION: Do not remove the warning and instruction la- bels attached to the heater base assembly. These markings con- tain important warranty and safety information.

1.With utility knife, cut the carton all the way around above the staples on the bottom tray. Lift the carton off the heater. Remove pack- ing. Note: The hood is located in the packing on the right hand side of the heater front. Lift the heater off the bottom tray.

2.Locate two screws above top corners of the fireplace insert screen. Remove and discard these screws. Lift fireplace insert screen up and pull out to remove.

3.Remove protective packaging applied to logs, log base assembly, and fireplace insert.

4.Remove fireplace insert hood from carton insert.

5.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought fireplace insert.

PRODUCT

IDENTIFICATION

Three Piece

Log Set

Optional

Remote

Control

Control

 

 

Knobs

Remote Selector

 

Piezo

Switch (Optional)

 

Ignitor

 

 

Figure 1 - Log Base Assembly

Top Louver Assembly

Top Outer

 

 

 

 

Casing

Firebox

 

 

Hood

 

 

Firebox

 

 

Support

 

 

Screen

Assembly

Bottom Louver

 

Gas Line

Blower

Access

Assembly

 

 

Assembly

 

Figure 2 - Fireplace Insert

REMOTE CONTROL

ACCESSORIES

There are four optional remote controls that can be purchased separately for this fireplace insert:

wall switch

wall thermostat

hand-held ON/OFF remote

hand-held thermostat remote See Accessories, page 34.

113195-01A

www.desatech.com

5

Image 5
Contents VI33NRB and VI33PRB Remote Ready GAS Fireplace Insert What to do if YOU Smell GASTable of Contents Safety Information Safety Information Local Codes Remote Control AccessoriesUnpacking Product IdentificationAIR for Combustion Ventilation Product FeaturesDetermining if You Have a Confined or Unconfined Space Determining FRESH-AIR Flow for Heater LocationConfined and Unconfined Space Ventilation AIR InstallationVentilation Air From Inside Building Ventilation Air From OutdoorsBlower Accessory Installing Surround KIT GS38 or GS43Check GAS Type Electrical HookupRemoving Screws and Screen Installation Clearances Installing HoodInstallation Items Needed Installing GAS Piping to Fireplace LocationNatural Connecting Fireplace Insert to GAS SupplyPropane/LP Test Pressures In Excess Of 1/2 Psig 3.5 kPa Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Fireplace Insert Installation Into Masonry FireplaceAssembling and Attaching Trim Installing LogsInstalling Log Set Installing 9-Volt Battery Not Included in Receiver Installing 9-VOLT BatteriesInstalling Remote Receiver Unit Lighting Instructions For Your Safety Read Before LightingOperating Fireplace Insert To Turn OFF GAS To Appliance Manual Lighting ProcedureOptional HAND-HELD Remote Operation Shutting Off HeaterAuto Thermostatic Mode Manual ModeSafety Features ON/OFF Series Model GhrcbKey Pad Lock Feature Auto Shutoff FeatureInspecting Burners Optional Blower OperationBurner Flame Pattern Cleaning MaintenanceBurner Primary AIR Holes Main BurnerLogs Wiring DiagramsObserved Problem Possible Cause Remedy TroubleshootingObserved Problem Possible Cause Remedy Ventilation requirements Statement above Gas leak. See Warning statement aboveGas leak. See Warning Replacement Parts SpecificationsTechnical Service Service HintsModels VI33NRB and VI33PRB Illustrated Parts BreakdownParts List Fireplace Insert Models VI33NRB and VI33PRB Magnet Catch Equipment Shutoff Valve GA5010 Receiver and HAND-HELD Remote Control KIT Ghrcb SeriesInformation Video Duplex Outlet KIT GA3555 Fire Crackle CF6-A113195-01A Limited Warranty VENT-FREE GAS Fireplace Insert Warranty InformationKeep this Warranty

VI33NRB, VI33PRB specifications

Desa VI33NRB and VI33PRB are cutting-edge solutions designed to meet the growing demands of modern industries. These innovative products combine advanced technologies and features that enhance productivity, efficiency, and sustainability.

One of the main highlights of the Desa VI33NRB is its remarkable energy efficiency. This model employs state-of-the-art energy management systems that significantly reduce power consumption while maintaining optimal performance levels. The implementation of smart sensors allows for real-time monitoring of energy usage, enabling users to identify potential savings and optimize operational costs.

In contrast, the VI33PRB focuses on advanced data processing capabilities. It integrates robust computing power with sophisticated algorithms that facilitate high-speed processing of large data sets. This feature is particularly beneficial in sectors such as manufacturing, logistics, and telecommunications, where data analytics plays a crucial role in decision-making and strategic planning.

Beyond energy efficiency and data processing, both models incorporate eco-friendly technologies that align with sustainable practices. They utilize recyclable materials in their construction, promoting environmental responsibility. Furthermore, Desa has prioritized the reduction of carbon footprints across both product lines, ensuring compliance with international environmental standards.

Another significant characteristic of these models is their versatile connectivity options. Equipped with IoT capabilities, the VI33NRB and VI33PRB enable seamless integration with existing systems and networks. This adaptability allows organizations to harness the power of cloud computing, facilitating remote monitoring, maintenance, and updates.

User experience has also been a central focus in the design of these models. Intuitive interfaces and user-friendly control panels make it easy for operators to engage with the systems. Training requirements are minimized, allowing for a smooth transition and quick onboarding of new users.

Security features are paramount in today’s digital landscape. The Desa VI33NRB and VI33PRB incorporate advanced encryption technologies and secure authentication protocols to protect sensitive data from unauthorized access. This commitment to security ensures peace of mind for users as they implement these systems in their operations.

In conclusion, Desa VI33NRB and VI33PRB are exemplary models that showcase the intersection of technology, sustainability, and user-friendliness. Their energy-efficient designs, powerful data processing, eco-friendly technologies, versatile connectivity, and robust security measures position them as leaders in their respective markets, paving the way for a more efficient and sustainable future in industrial solutions.