Desa VI33PRB, VI33NRB installation manual Product Features, AIR for Combustion Ventilation

Page 6

PRODUCT FEATURES

OPERATION

This vent-free fireplace insert is clean burning. It requires no outside venting. There is no heat loss out a vent or up a chimney. Heat is generated by both realistic flames and glowing embers. When used without the blower, the fireplace insert re- quires no electricity making it ideal for emergency backup heat.

SAFETY DEVICE

This fireplace insert has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for vent-free room heaters. The ODS system shuts off the fire- place insert if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This fireplace insert has a piezo ignitor. This sys- tem requires no matches, batteries, or other sources to light fireplace insert.

BLOWER ASSEMBLY

This fireplace insert is equipped with a blower assembly. The blower operates thermostatically and has a variable control. The blower circulates heated air from the fireplace insert into the room. Use of blower is optional.

AIR FOR COMBUSTION

AND VENTILATION

WARNING: This heater shall notbeinstalledinaconfinedspace or unusually tight construction unless provisions are provided foradequatecombustionandven- tilation air. Read the following in- structions to insure proper fresh air for this and other fuel-burning appliances in your home.

Today’s homes are built more energy efficient than ever. New materials, increased insulation, and new construction methods help reduce heat loss in homes. Home owners weather strip and caulk around windows and doors to keep the cold air out and the warm air in. During heating months, home owners want their homes as airtight as possible.

While it is good to make your home energy effi- cient, your home needs to breathe. Fresh air must enter your home. All fuel-burning appliances need fresh air for proper combustion and ventilation.

Exhaust fans, fireplaces, clothes dryers, and fuel burning appliances draw air from the house to operate. You must provide adequate fresh air for these appliances. This will insure proper venting of vented fuel-burning appliances.

PROVIDING ADEQUATE

VENTILATION

The following are excerpts from National Fuel Gas Code ANSI Z223.1/NFPA 54, Section 5.3, Air for Combustion and Ventilation.

All spaces in homes fall into one of the three fol- lowing ventilation classifications:

1.Unusually Tight Construction

2.Unconfined Space

3.Confined Space

The information on pages 6 through 8 will help you classify your space and provide adequate ven- tilation.

Unusually Tight Construction

The air that leaks around doors and windows may provide enough fresh air for combustion and ven- tilation. However, in buildings of unusually tight construction, you must provide additional fresh air. Unusually tight construction is defined as con- struction where:

a.walls and ceilings exposed to the out- side atmosphere have a continuous water vapor retarder with a rating of one perm (6 x 10-11kg per pa-sec-m2) or less with openings gasketed or sealed and

b.weather stripping has been added on openable windows and doors and

c.caulking or sealants are applied to ar- eas such as joints around window and door frames, between sole plates and floors, between wall-ceiling joints, be- tween wall panels, at penetrations for plumbing, electrical, and gas lines, and at other openings.

If your home meets all of the three criteria above, you must provide additional fresh air. See Ventilation Air From Outdoors, page 8.

If your home does not meet all of the three criteria above, proceed to Determining Fresh-Air Flow for Heater Location, page 7.

6

www.desatech.com

113195-01A

Page 5 Page 7
Image 6
Page 5 Page 7
Contents What to do if YOU Smell GAS VI33NRB and VI33PRB Remote Ready GAS Fireplace InsertTable of Contents Safety Information Safety Information Unpacking Remote Control AccessoriesLocal Codes Product IdentificationProduct Features AIR for Combustion VentilationDetermining FRESH-AIR Flow for Heater Location Confined and Unconfined SpaceDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building InstallationVentilation AIR Ventilation Air From OutdoorsCheck GAS Type Installing Surround KIT GS38 or GS43Blower Accessory Electrical HookupRemoving Screws and Screen Installing Hood Installation ClearancesInstalling GAS Piping to Fireplace Location Installation Items NeededConnecting Fireplace Insert to GAS Supply Propane/LPNatural Checking GAS Connections Test Pressures In Excess Of 1/2 Psig 3.5 kPaFireplace Insert Installation Into Masonry Fireplace Test Pressures Equal To or Less Than 1/2 Psig 3.5 kPaInstalling Logs Assembling and Attaching TrimInstalling Log Set Installing 9-VOLT Batteries Installing Remote Receiver UnitInstalling 9-Volt Battery Not Included in Receiver For Your Safety Read Before Lighting Operating Fireplace InsertLighting Instructions Optional HAND-HELD Remote Operation Manual Lighting ProcedureTo Turn OFF GAS To Appliance Shutting Off HeaterSafety Features Manual ModeAuto Thermostatic Mode ON/OFF Series Model GhrcbInspecting Burners Auto Shutoff FeatureKey Pad Lock Feature Optional Blower OperationBurner Primary AIR Holes Cleaning MaintenanceBurner Flame Pattern Main BurnerWiring Diagrams LogsTroubleshooting Observed Problem Possible Cause RemedyObserved Problem Possible Cause Remedy Ventilation requirements Gas leak. See Warning statement above Gas leak. See WarningStatement above Technical Service SpecificationsReplacement Parts Service HintsIllustrated Parts Breakdown Models VI33NRB and VI33PRBParts List Fireplace Insert Models VI33NRB and VI33PRB Magnet Catch Information Video Receiver and HAND-HELD Remote Control KIT Ghrcb SeriesEquipment Shutoff Valve GA5010 Duplex Outlet KIT GA3555 Fire Crackle CF6-A113195-01A Warranty Information Keep this WarrantyLimited Warranty VENT-FREE GAS Fireplace Insert

VI33NRB, VI33PRB specifications

Desa VI33NRB and VI33PRB are cutting-edge solutions designed to meet the growing demands of modern industries. These innovative products combine advanced technologies and features that enhance productivity, efficiency, and sustainability.

One of the main highlights of the Desa VI33NRB is its remarkable energy efficiency. This model employs state-of-the-art energy management systems that significantly reduce power consumption while maintaining optimal performance levels. The implementation of smart sensors allows for real-time monitoring of energy usage, enabling users to identify potential savings and optimize operational costs.

In contrast, the VI33PRB focuses on advanced data processing capabilities. It integrates robust computing power with sophisticated algorithms that facilitate high-speed processing of large data sets. This feature is particularly beneficial in sectors such as manufacturing, logistics, and telecommunications, where data analytics plays a crucial role in decision-making and strategic planning.

Beyond energy efficiency and data processing, both models incorporate eco-friendly technologies that align with sustainable practices. They utilize recyclable materials in their construction, promoting environmental responsibility. Furthermore, Desa has prioritized the reduction of carbon footprints across both product lines, ensuring compliance with international environmental standards.

Another significant characteristic of these models is their versatile connectivity options. Equipped with IoT capabilities, the VI33NRB and VI33PRB enable seamless integration with existing systems and networks. This adaptability allows organizations to harness the power of cloud computing, facilitating remote monitoring, maintenance, and updates.

User experience has also been a central focus in the design of these models. Intuitive interfaces and user-friendly control panels make it easy for operators to engage with the systems. Training requirements are minimized, allowing for a smooth transition and quick onboarding of new users.

Security features are paramount in today’s digital landscape. The Desa VI33NRB and VI33PRB incorporate advanced encryption technologies and secure authentication protocols to protect sensitive data from unauthorized access. This commitment to security ensures peace of mind for users as they implement these systems in their operations.

In conclusion, Desa VI33NRB and VI33PRB are exemplary models that showcase the intersection of technology, sustainability, and user-friendliness. Their energy-efficient designs, powerful data processing, eco-friendly technologies, versatile connectivity, and robust security measures position them as leaders in their respective markets, paving the way for a more efficient and sustainable future in industrial solutions.
Top Page Image Contents