Operating Instructions, Heater Control

Operating Instructions

All of the fireplace control functions can be accessed in two (2) ways:

•Using a multifunction remote control unit

•Using touchpad control panel, located in the lower right-hand corner of the fireplace behind the door front or fixed front (depending on the model).

Remote control unit has all the controls required to operate any feature on the unit. If you prefer to use the touchpad control on the fireplace unit itself, open the fixed front or open the doors (depending on the model) to access the touchpad buttons. The layout of the but- tons on touchpad and remote control unit can be seen in Figures 8 & 9, respectively.


				3
				3		R
						R

		A
		A							6


							5

	2

								4
			1					4
			1
					LED
					LED


Fig. 8 Touchpad buttons.

•As a visual effect - only flame effect is on, the heater is off. We recommend this mode for warm weather application, when you want the ambiance of a fire, without any heat output.

•As a heater - only heater is on, while the flame effect is off. this mode allows you to use your fireplace as an electric heater, without any flame effect.

Refer to Figure 8 & 9 for locations of the buttons on both, the touchpad and remote control unit, described in the following operating instructions. Note that in both cases, button numbers as shown in the figures are the same.

Flame Speed Control

Your fireplace features a flame speed control. By depressing button 1 once you will activate the flame effect. If this is the first time you use this unit, the visu- al indicator of the flame effect (A) will be lit up to about half its height. By repeatedly depressing buttons 2 and 3, you can respectively decrease or increase the flame effect speed to achieve desired flame effect. Refer to visual indicator A to monitor relative speed of the flame effect between the slowest (indicator A showing only one light) and fastest (indicator A showing all lights lit up) setting. For added convenience, control board in your fireplace will remember your last setting on sub- sequent activation.

Heater Control

Your fireplace features a variable temperature setting control. By depressing button 4 once, you will have activated the heater. To change the comfort level in the

ON/OFF 6

Turns unit OFF and starts BOTH functions at remembered setting.

Fig. 9 Remote control.

The fireplace features conveniently separate controls for flame effect and for heater control. This allows you to operate the unit in three (3) different modes:

•As a full-featured fireplace - both flame effect and heater are on. This mode allows you to enjoy the look of the fire along with the heat output of a heater.

room, you can repeatedly depress buttons 5 and 6 to decrease or increase the temperature setting, respec- tively (for example, by repeatedly depressing button 6, you will increase the temperature setting and your room will feel warmer). To achieve the desired effect, refer to visual indicator R, as your guide on the level of the heat output.

NOTE: During each operation of this unit, the unit fea- tures will initiate the LED, a visual indicator of flame effect (A), and a visual indicator of the heat output (R). The LED and all visual indicators will automatically turn off after 20 seconds.

10007176

VCEF33, VCEF36, VCEF26 specifications

Vermont Castings is renowned for its commitment to quality and craftsmanship, particularly evident in its line of cast iron gas fireplaces, including the VCEF26, VCEF36, and VCEF33 models. Each of these units reflects a dedication to performance, efficiency, and aesthetic appeal, making them ideal choices for heating modern homes.

The VCEF26 is a compact yet powerful fireplace that is perfect for smaller spaces. Its design is optimized for efficient heating, featuring an impressive heat output while maintaining a low profile. With the ability to produce up to 26,000 BTUs, the VCEF26 warms your living area effectively without overpowering the space. One notable feature of this model is its embedded ceramic glass that offers a stunning view of the flames while ensuring safety and efficiency. The adjustable flame height enhances ambiance and accommodates different heating needs.

Moving on to the VCEF36, this fireplace is a versatile choice for larger rooms. With a heat output of up to 36,000 BTUs, it ensures that ample warmth reaches every corner of your space. The VCEF36 also boasts Vermont Castings' advanced burner technology, which promotes an even flame spread and improves fuel efficiency. Additionally, this model comes with customizable features, including various trim options and a choice of decorative media, allowing homeowners to tailor the look of their fireplace to suit their individual styles.

The VCEF33 offers a middle-ground option, combining the features of the VCEF26 and VCEF36. With a heat output of 33,000 BTUs, this model is designed to meet the needs of medium to large rooms. Its innovative design includes an easy-to-use remote control for convenient operation, allowing users to adjust the flame and heat settings with the touch of a button. The VCEF33 also implements a direct venting system, ensuring clean and efficient combustion while minimizing the impact on indoor air quality.

All three models harness the benefits of Vermont Castings' commitment to environmental responsibility. Each unit complies with stringent EPA standards for emissions, reflecting the company’s pledge to sustainability. The cast iron construction not only provides durability but also retains heat effectively, contributing to their overall efficiency.

In summary, the Vermont Castings VCEF26, VCEF36, and VCEF33 gas fireplaces stand out for their combination of aesthetic appeal, performance, and energy efficiency. With versatile designs and advanced technologies, they cater to a wide range of heating needs, ensuring comfort and style for any home.