Vermont Casting SC42, SR42, SR36, SC36 manual Installing Line For Gas Logs, Fireplace TOP

Page 18

Majestic Fireplaces® SR/SC Series

10. Installing Line For Gas Logs

Vermont Castings, Majestic Products fireplaces are designed to accept a 1/2 inch gas line for installation of an approved gas appliance. (Vermont Castings, Majestic Products manufactures a wide variety of gas logs for use in Vermont Castings, Majestic Products fireplaces.)

Be sure to have the appliance installed in accordance with building codes.

Gas connection may enter from either left or right side of the fireplace.

Locate appropriate gas line in the outer casing of fireplace and remove insulation from gas line tube. (Fig. 26)

From inside the fireplace, locate the knockout on the firebrick -- be sure you are on the appropriate or "gas line" side of the fireplace. Using a flat bladed screw- driver or small chisel and hammer, carefully tap around the knockout until it loosens and falls out.

Install 1/2 inch certified gas pipe through opening. After gas pipe installation is complete, use insulation that was removed from gas line tube to repack space around the pipe. Material should be inserted from outside of the fireplace and packed tightly to totally seal between the pipe and tube.

Note: Gas pipe should not come in contact with any wood structures until it has reached a point at least one (1) inch away from fireplace side.

NOTE: When installing an ANSI Z21.11.2 ventless appliance the finishing material used for the mantel must be rated at 250°F or greater.

BTU input of a gas appliance installed in fireplace should be rated less than 100,000 BTU/Hr.

Gas pipe installation is intended for connection to a decorative gas appliance only when (1.) incorporating an automatic shutoff device and (2.) complying with the Standard for Decorative Gas Appliances for Installation in Vented Fireplaces (ANSI Z21.60) or CSA draft requirements for Gas-Fired Log Lighters for Woodburning Fireplaces (Draft No. 4, August 1993).

Decorative gas appliance should be installed in accordance with the National Fuel Gas Code, ANSI Z223.1 (latest edition).

 

HOLE IN

FIREPLACE TOP

 

OUTER CASING

 

 

 

1"

 

GAS LINE

SUPPLY

 

LINE

 

TUBE

 

 

 

CERAMIC

REPACK

 

KNOCKOUT

INSULATION

HOLE IN

 

OUTER

 

CASING

 

 

 

CERAMIC

 

 

KNOCKOUT

 

 

(Both sides)

 

 

FP560

Fig. 26

Gas line access.

 

CAUTION: WHEN USING DECORATIVE GAS APPLIANCE, FLUE DAMPER MUST BE SET IN FULLY OPEN POSITION. IF

YOU HAVE GLASS DOORS ON THE FIREPLACE, THEY MUST ALSO BE FULLY

OPENED.

WARNING: DO NOT OPERATE AN UNVENTED GAS LOG SET IN THIS FIRE- PLACE WITH THE CHIMNEY REMOVED.

WARNING: WHEN INSTALLING AN UNVENTEDAS LOG SET, THE MAJESTIC MODEL AH3244BK OR AH3244PB 4"

ADJUSTABLE HOOD MUST BE USED.

If installing an unvented gas log set, refer to statement below:

Only unvented gas logsets which have been found to comply with the Standard for Unvented Room Heaters, ANSI Z21.11.2, are to be installed in this fireplace.

18

Image 18
Contents SR36 Safety Information Table Of ContentsSR36 Series Woodburning Fireplace SR42 Series Woodburning Fireplace Chase Installation Chimney ElbowOffset Planning The Chimney Run Planning InformationMounting The Fireplace Ten Foot RuleChimney Supports InstallationChase Installation Insulating Fireplace Enclosure For Cold ClimatesFraming Installing Electrical Wire for Circulator ModelsInstall Fan Kit Assembly Option For Circulating Models OnlyCeiling Chimney Hole Possible Obstructions Straight-Up Chimney InstallationOffset Installation Cutting the HolePositioning, Safety Strips, Securing The Fireplace Installing Outside Air KitInstalling The Chimney System For Insulation Shield Installing the Firestop Spacer Ceiling HoleProper Firestop Spacer Installation Elbow StrapAdditional Ceilings Continue Installing Pipe to Complete RunInstall Remainder of Chimney Sections Penetrating the RoofFinishing Finish Wall Installing Top Housing Or TerminationInstalling Chimney In a Chase Front View Side ViewSide Wall Protection TOP ViewHearth Installation With WithoutCommon Materials and Factors Installing Line For Gas Logs Fireplace TOPSR/SC36 SR/SC42 948Accessories TwabrChimney Components RLTSK8LChimney Components cont. Canada Limited Warranty & 30 Year Protection Plan Vermont Castings, Majestic Products

SR36, SR42, SC42, SC36 specifications

Vermont Castings is renowned for producing high-quality wood and gas fireplaces and stoves, with models like the SR36, SC42, SR42, and SC36 standing out for their efficiency, design, and innovative features. These gas inserts offer a perfect blend of performance and aesthetics, making them an ideal choice for any home looking to enhance its ambiance and heating capabilities.

The Vermont Castings SR36 and SR42 are both designed to deliver warmth and comfort while maintaining an elegant and traditional look. The SR36 model boasts a heating capacity of up to 30,000 BTUs, suitable for spaces up to 1,500 square feet, making it an excellent option for mid-sized rooms. The SR42, with a higher BTU output of up to 40,000, is perfect for larger areas, providing exceptional warmth and efficiency.

The SC36 and SC42 models cater to those wanting traditional style with state-of-the-art technology. The SC36 offers similar heating capabilities, ideal for cozy evenings, while the SC42 brings in a larger flame area for a more dramatic effect. Both models feature a large, clear glass front that provides an unobstructed view of the fire, enhancing the room's atmosphere.

One of the standout characteristics of these models is their inclusion of advanced combustion technology, which ensures maximum heat output while minimizing emissions. The EPA-certified design means that users can enjoy an environmentally friendly heating solution without sacrificing performance. Innovative features like the adjustable flame height and thermostat control allow users to customize their experience easily.

Additionally, the Vermont Castings inserts come equipped with a convenient remote control option, allowing homeowners to adjust settings from the comfort of their sofas. The cast iron construction is not only stylish but also ensures durability and excellent heat retention.

In summary, the Vermont Castings SR36, SC42, SR42, and SC36 models represent the ideal fusion of tradition and modern technology in heating solutions. With their high efficiency, beautiful designs, and user-friendly features, these gas inserts provide an unparalleled heating experience, making them a cherished addition to any home.