Vermont Casting ICVCTK02 Operating Instructions, Heater Operation, Frequency Setting Information

Page 8

Inspire Electric Fireplace

Operating Instructions

Heater Operation

The heater is operated by the remote control handset. A master ON/OFF switch is located under the appliance on the left hand side. This is used to turn the appliance completely off.

All further operations are controlled by using the remote control handset. (Fig. 5)

1.Ensure the appliance is plugged in and switched on.

2.To turn the fire on, press the fire on/flame effect but- ton.

3.For low heat, ensure the flame effect is on and press the low heat button once. To turn the low heat off, press the low heat button a second time. The fire will now be running with flame effect only.

4.For high heat, ensure the flame effect and low heat settings have been switched on. Press the high heat button. The high heat button will only work if the flame effect and low heat have already been switched on. To turn high heat off, press the high heat button a second time. The fire will now be run- ning with low heat.

5.To place the fire in a standby mode at any time, press the fire off button.

Fire On/Flame

Effect Only

Fire Off

Low Heat

High Heat

On/Off

 

On/Off

FP1639

Fig. 5 Remote control handset.

Switch

Marking

Operation

Master ON/OFF

O I

On/Off. Depress to I,

 

 

this supplies power to the

 

 

appliance and places it in

 

 

a standby mode.

Frequency Setting Information

Dial Set

Switch Set

A

ON/ON/ON/ON

B

ON/ON/ON/OFF

C

ON/ON/OFF/ON

D

ON/ON/OFF/OFF

E

ON/OFF/ON/ON

F

ON/OFF/ON/OFF

G

ON/OFF/OFF/ON

H

ON/OFF/OFF/OFF

I

OFF/ON/ON/ON

J

OFF/ON/ON/OFF

K

OFF/ON/OFF/ON

L

OFF/ON/OFF/OFF

M

OFF/OFF/ON/ON

N

OFF/OFF/ON/OFF

O

OFF/OFF/OFF/ON

P

OFF/OFF/OFF/OFF

 

 

Example of Frequency Setting

ON

1

2

3

4

Switch Set = ON ON OFF ON

Dial Set = C

NOTE: The frequency setting of the RF transmitter label affixed on the lower left front of the unit must match the dial setting on the rear of the remote control handset.

8

10009472

Image 8
Contents Service must be performed by a qualified service agency Inspire Electric FireplaceTable of Contents Installation Instructions GeneralLocating Your Fireplace Clearance to CombustiblesFireplace Dimensions Electrical SpecificationsElectrical Connection Grounding InstructionsDirect Hard Wiring Electric Fireplace Fireplace Assembly Place insert panels on either side of trim Heater Operation Frequency Setting InformationOperating Instructions Care and Cleaning MaintenanceLight Bulb Replacement Inspire Replacement Parts Description Part NumberYear Warranty For Vermont Castings Electric FireplaceCFM Corporation

ICVCTK01, ICVCTK02 specifications

Vermont Castings offers a range of high-performance gas fireplaces, and two notable models in their lineup are the ICVCTK02 and ICVCTK01. These models stand out for their blend of classic design, advanced technology, and powerful heating capabilities.

The ICVCTK02 and ICVCTK01 fireplace inserts share many features that make them popular choices among homeowners looking to enhance their living spaces with warmth and ambiance. One of the most prominent characteristics of these models is their elegant cast iron construction, which not only provides a timeless aesthetic but also contributes to efficient heat retention and distribution. The durable cast iron body helps maintain consistent temperatures, allowing for even heating throughout the room.

Both models are equipped with Vermont Castings' innovative burner technology, designed to provide a clean and efficient burn. This ensures that these fireplaces offer a higher heat output with lower emissions, making them an environmentally friendly choice. The advanced burner system also provides the option for both natural gas and propane fuel sources, catering to the preferences and availability of different households.

An important feature of the ICVCTK02 and ICVCTK01 is their impressive BTU output. These models are capable of producing a substantial amount of heat, making them well-suited for rooms of various sizes. The controlled heat output allows users to customize their heating experience, ensuring comfort during colder months.

Furthermore, the ICVCTK02 comes with the additional advantage of a multi-function remote control, allowing homeowners to adjust the flame height, control the blower speed, and set timers without having to leave their seats. The ICVCTK01, while slightly more basic in its controls, still offers easy access to user-friendly features that enhance the overall experience.

Both fireplace inserts also emphasize usability and safety. They feature a large viewing window that provides a great view of the beautiful flames, while the glass door keeps the fire contained and safe. Additionally, safety features include a heat-resistant glass and ventilation systems designed to reduce the risk of overheating.

In summary, the Vermont Castings ICVCTK02 and ICVCTK01 fireplace inserts combine elegance, efficiency, and modern technology. With their stunning cast iron design, advanced burner performance, and user-friendly features, these fireplaces are an excellent investment for creating a cozy and inviting atmosphere in any home.