Exclusions and Limitations | FMI GF55, GFI55 guide

WARRANTY

Exclusions and Limitations:

1.This Warranty does not cover tarnish, discoloration or wear on the plating or paint.

2.This Warranty excludes wear and tear or breakage caused by cleaning, moving or service on log set.

3.A qualiﬁ ed installer must install this stove or ﬁ replace. This Limited Warranty covers defects in materials and workmanship only if the product has been installed in accordance with local building and ﬁ re codes; in their absence, refer to the owner’s manual. If the product is damaged or broken as a result of any alteration, willful abuse, mishandling, accident, neglect, or misuse of the product, the Limited Warranty does not apply.

4.The stove must be operated and maintained at all times in accordance with the instructions in the Owner’s Manual. If the unit shows signs of neglect or misuse, it is not covered under the terms of this Warranty policy. Performance problems due to operator error will not be covered by the Limited Warranty policy.

5.As this is a heating appliance some changes in colour of surface ﬁ nishes may occur. This is not a ﬂ aw and as such is not covered under this warranty.

6.Some minor expansion, contraction, or movement of certain parts and resulting noise, is normal and not a defect and therefore, is not covered under this Limited Warranty.

7.Misuse includes over-ﬁ ring. Over-ﬁ ring this appliance can cause serious damage and will nullify the Limited Warranty.

8.The Limited Warranty will cover glass thermal breakage only and will not cover misuse of the stove glass, including but not limited to glass that is struck, has surface contaminates or has had harsh or abrasive cleaners used on it.

9.This warranty does not cover products made or provided by other manufacturers and used in conjunction with the operation of this stove without prior authorization from FPI The use of such products may nullify the Limited Warranty on this stove. If unsure as to the extent of this Limited Warranty, contact your authorized Greenﬁ re dealer before installation.

10.FPI will not be responsible for inadequate performance caused by environmental conditions, or use of any fuel other than certiﬁ ed wood pellets.

11.The Limited Warranty does not cover installation and operational related problems such as spillage caused by environmental conditions. Environmental conditions include but are not limited to nearby trees, buildings, roof tops, wind, hills, mountains, inad- equate venting or ventilation, excessive offsets, negative air pressures or other inﬂ uences caused by mechanical systems such as furnaces, fans, clothes dryers etc.

12.The Limited Warranty is void if:

a)The stove has been operated in atmospheres contaminated by chlorine, ﬂ uorine or other damaging chemicals.

b)The stove is subject to submersion in water or prolonged periods of dampness or condensation.

c)Any damage to the unit, combustion chamber or other components due to water, or weather damage which is the result of, but not limited to, improper chimney/venting installation.

c)Salt air in coastal areas or high humidity can be corrosive to the ﬁ nish; these environments can cause rusting. Damage caused by salt air or high humidity is not covered by the Limited Warranty.

13.Exclusions to the Limited Warranty include: injury, loss of use, damage, failure to function due to accident, negligence, misuse, improper installation, alteration or adjustment of the manufacturer’s settings of components, lack of proper and regular mainte- nance, alteration, or act of God.

14.The Limited Warranty does not cover damage caused to the ﬁ replace or stove while in transit. If this occurs, do not operate the stove and contact your courier and/or dealer.

15.The Limited Warranty does not extend to or include ﬁ rebox paint, door or glass gaskets with damage caused by normal wear and tear, or exterior paint discoloration or chipping, worn gaskets, etc.

16.The Limited Warranty does not include damage to the unit caused by abuse, improper installation, or modiﬁ cation of the unit.

14	Greenﬁ re Pellet Stove and Insert Owner's Manual

GF55, GFI55 specifications

The FMI GF55 and GFI55 are two notable models in the world of high-performance power generation and distribution, catering to various industrial and commercial applications. Both models are designed with cutting-edge technology and engineering, making them reliable solutions for today's energy demands.

The FMI GF55 is a gas-powered generator offering high efficiency and low emissions. Designed for various uses, from construction sites to emergency backup power, this generator boasts a robust 55 kVA output. Its compact design allows for easy transportation and installation, making it a preferred choice for contractors and businesses needing portable power. The generator is equipped with a silent operation feature, ensuring minimal noise pollution, which is particularly advantageous in residential areas or sensitive environments.

On the other hand, the GFI55 model stands out for its advanced inverter technology. This technology enables stable power supply with minimal harmonic distortion, making it suitable for sensitive electronic equipment. The GFI55 is also built with durability in mind, using high-quality materials that ensure a longer lifespan and reduced maintenance needs. Its lightweight structure, combined with an easy-to-use interface, allows operators to quickly set up and utilize the generator.

In terms of connectivity, both models feature multiple output options, allowing users to connect various devices simultaneously. This versatility is a significant advantage for users who require power for multiple applications at once. Additionally, FMI prioritizes safety, equipping both the GF55 and GFI55 with various safety features such as overload protection and automatic shutdown to prevent damage during operational anomalies.

Both models incorporate fuel-efficient technologies that minimize running costs while maximizing performance. They are designed to comply with stringent environmental regulations, ensuring reduced carbon footprints for operations. This feature is growing in importance as industries increasingly pivot towards sustainable practices.

In conclusion, the FMI GF55 and GFI55 represent the best in power generation technology, combining efficiency, functionality, and safety in a compact design. Businesses and contractors looking for reliable, durable, and environmentally friendly power solutions will find these models effective and economical for their operational needs.