Vermont Casting BC36, BR42, BC42, BR36 manual Safety Information, Table of Contents

Page 2

Majestic Fireplaces® BR/BC Series

Safety Information

PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING FIREPLACE.

IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible fire hazard and will void the warranty.

Description

The BR/BC Series fireplaces are solid fuel, woodburning fireplaces. The BR36/42 (Builder Radiant) is a clean-face fireplace and the BC36/42 (Builder Circulating) unit has fixed grilles.

Precautions

CFM Corporation fireplaces and component parts have been highly tested and will operate safely when installed in accordance with instructions provided in this manual. Carefully read and understand all instructions before beginning installation.

If you notice any damage to fireplace or component parts, immediately report damage to your Majestic Fireplaces dealer.

Only use CFM Corporation components or the warranty will be voided and a fire hazard may be created.

CFM Corporation warranty will be voided by and CFM Corporation disclaims any responsibility for the following actions:

Burn only solid wood fuel or gas logs.

Do not install a solid fuel burning insert or other products not specified for use with this fireplace.

Proposition 65 Warning: Fuels used in gas, wood- burning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Drafts

The fireplace should not be located in areas that create drafts (ie: frequently opened doors and central heating air inlets/outlets) that hamper the normal flow of air into the fire.

Gas Logs

If you plan to install a gas log, the gas line should be installed before framing the fireplace. The gas line must be installed by a certified gas line installer.

Installation of any damaged fireplace or chim- ney component;

Modification of fireplace, chimney assembly or any component parts thereof; (except for chase flashings as detailed in Chimney Top installation instructions).

Installation other than as instructed by CFM Corporation; or

Installation and/or use of any component part not manufactured or approved by CFM Corpo- ration in combination or assembly with a Majes- tic Fireplaces fireplace system, notwithstanding any independent testing laboratory or other third party approval of such component parts or accessory.

Any such action may possibly cause a fire hazard.

Consult local building codes to ensure that you are in compliance before installing the fireplace.

Fireplaces must be vented to the out-of-doors.

Do not obstruct or modify air inlets/outlets in any manner.

Do not install combustible materials on any of the black fireplace surround.

BR36 / BR42

BC36 / BC42

Listed

UL 127 / ULC-S610

Standard for Factory Built Fireplaces

Units:

FA30C1, FA30C0, FA30R1, FA30R0, GA30C1, GA30C0, GA30R1, GA30R0, FA40C1, FA40C0, FA40R1, FA40R0,

GA40C1, GA40C0, GA40R1, GA40R0

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . 2

Specifications and Framing . . . . . . . . . . 3

Parts Identification . . . . . . . . . . . . . . . . . 5

Chimney Requirements . . . . . . . . . . . . . 6

Planning Information . . . . . . . . . . . . . . . . 7

Installation . . . . . . . . . . . . . . . . . . . . . . . 8

Replacement Parts . . . . . . . . . . . . . . . . 19

Accessories . . . . . . . . . . . . . . . . . . . . . 20

2

7412944

Image 2
Contents BR/BC Series Safety Information Table of Contents451162mm 45 1162mm 13mm BR42 Series Woodburning Fireplace BR42 Series specifications and framingChase Installation Front Width Back Width Depth30˚ Elbow Offsets Illustration KeyPlanning the Chimney Run Planning InformationMounting the Fireplace Ten Foot RuleChimney Supports InstallationChase Installation Insulating Fireplace Enclosure for Cold ClimatesFraming Installing Electrical Wire For Circulator ModelsInstall Fan Kit Assembly Option For Circulating Models OnlyCeiling Chimney Hole Possible Obstructions Straight-Up Chimney InstallationOffset Installation Cutting the HolePositioning, Safety Strips Securing the Fireplace Installing Outside Air KitProper Firestop Spacer Installation Installing the Chimney SystemInstalling the Firestop Spacer Ceiling Hole Additional Ceilings Continue Installing Pipe to Complete RunCanadian Requirements for Insulation Shield Penetrating the RoofInstalling Chimney In a Chase Install Remainder of Chimney SectionsInstalling Top Housing Or Termination Finishing Finish WallFacing Material Examples of wall shield insulation Hearth InstallationSide Wall Protection Example for Common Brick Recessed Installation BR/BC36 OnlyExample of Determining Hearth Extension Equiva- lents Installing Line For Gas Log Gas line accessBR/BC Series Item/Model NumberAccessories 42GDKDP BR/BC42Chimney Components RLTSK8Chimney Components cont. Canada Limited Warranty & 30 Year Protection Plan For Majestic Fireplaces PRE-ENGINEERED Fireplace SystemsCFM Corporation
Related manuals
Manual 24 pages 9.58 Kb

BC36, BC42, BR36, BR42 specifications

Vermont Castings is renowned for its high-quality, American-made gas stoves, particularly the BR36, BR42, BC42, and BC36 models. These gas-burning appliances are engineered to provide warmth and comfort while seamlessly blending into any home décor.

The BR36 is designed with versatility in mind, featuring a compact 36-inch size that makes it ideal for smaller spaces. It utilizes a 35,000 BTU burner that delivers impressive heat output, ensuring a cozy atmosphere year-round. The innovative burner technology provides direct venting options, ensuring efficient performance and minimal heat loss. The BR36 is further enhanced by Vermont Castings' unique premium cast iron construction, which radiates heat effectively for long-lasting warmth.

The BR42 offers a larger heating capacity, suitable for medium to larger rooms. With a 42-inch size, it boasts a BTU rating of up to 42,000, enabling it to warm expansive areas with ease. The advanced flame technology creates a realistic fire appearance while maintaining efficiency. This model also includes adjustable airflow settings, allowing users to customize the flame height and heat output according to preference.

The BC42 is a standout model that bridges the gap between modern aesthetics and traditional craftsmanship. With a contemporary design, it caters to homeowners who appreciate style without sacrificing efficiency. The BC42 maintains a high heat output with its efficient burner system, producing up to 35,000 BTUs. Its programmable thermostat provides convenience, allowing for precise temperature control and the ability to schedule heating times, making it user-friendly.

Finally, the BC36, like the other models, boasts outstanding features but in a more compact design. It is perfect for urban dwellers and those looking to optimize small living areas. The BC36 retains efficiency and style, providing up to 30,000 BTUs of heat output. This model also includes an easy-to-use control panel and a large viewing area that allows for excellent fire visibility, enhancing the ambiance of any room.

All four models feature Vermont Castings' commitment to sustainability, with many designs adhering to rigorous environmental standards and using clean-burning technology. These gas stoves are not only functional but also designed to enrich the home experience, proving that comfort and elegance can coexist effortlessly. With Vermont Castings' legacy of excellence, the BR36, BR42, BC42, and BC36 models are exceptional choices for anyone seeking reliable heating solutions.