Vermont Casting BR36, BR42, BC42, BC36 manual Limited Warranty & 30 Year Protection Plan

Page 23

Limited Warranty & 30 Year Protection Plan

For MAJESTIC FIREPLACES® PRE-ENGINEERED Fireplace Systems

CFM Corporation warrants its MAJESTIC FIREPLACES® Pre- Engineered Fireplace (“Fireplace”) and the CFM Corporation sup- plied firegrate, glass doors, outside air system, fan motor, and liners to be free from defects in material or workmanship, as follows:

A. Fireplace and Chimney Components: (exclusive of CFM Corporation-supplied firegrate, glass doors, outside air system, fan motor, and liners all of which are covered by separate warranties under paragraphs B through D below): At its option for a period of thirty (30) years from the date the Fireplace is installed, CFM Corporation will;

(1)For a period of five (5) years from the date the Fireplace is installed, CFM Corporation, at its option, will repair or replace any defective part without charge.

(2)Thereafter, through the 10th year after the date the Fireplace is installed, if replacement parts are available, CFM Corporation will provide a replacement for any defective part without charge for the part itself. The consumer must pay for everything else other than the part.

(3)Thereafter, through the 30th year after the date the Fireplace is installed, if replacement parts are available,CFM Corporation will provide a replacement for any defective part at a cost to the consumer of CFM Corporation then current list price, FOB CFM Corporation factory.

B.Firegrate, Glass Doors, Outside Air System:

For a period of 90 days from the date the Fireplace is installed CFM Corporation, at its option, will provide a replacement for any defective part, without charge for the part itself, FOB CFM Corpora- tion factory, (The consumer must pay for everything else other than the part,).

C. Fan Motor:

(1)For a period of one (1) year from the date the Fireplace is installed, CFM Corporation, at its option, will repair or replace any defective part without charge.

(2)Thereafter, through the 30th year after the date the Fireplace is installed CFM Corporation, at its option, if replacement parts are available, will provide a replacement for any defective part at a cost to the consumer of CFM Corporation then current list price, FOB CFM Corporation factory.

D.Liners (Refractory or Metal):

(1)For a period of two (2) years from the date the Fireplace is installed, CFM Corporation, at its option, will repair or replace any defective part without charge.

(2)Thereafter, through the 30th year after the date the Fireplace is installed CFM Corporation, if replacement parts are available, will provide a replacement for any defective part at a cost to the consumer of CFM Corporation then current list price, FOB CFM Corporation factory.

This warranty is subject to the following conditions and limitations:

(1)This warranty is extended only to a Fireplace installed in the

continental United States, the state of Alaska and Canada; only if and so long as the Fireplace is installed according to the installation instructions furnished with the Fireplace, and operated at all times under normal conditions, use and service according to the opera- tive instructions furnished with the Fireplace, and only if and so long as the Fireplace is not removed from its original installation.

(2)This warranty is non-transferrable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the Company.

(3)The sole and exclusive remedies for breach of any warran- ties hereunder shall be for the repair, replacement or provision of a replacement part at CFM Corporation then current list price, FOB CFM Corporation factory, for any defective part as specified in paragraphs A through D.

(4)CFM Corporation shall not be liable for damage from any smoking of a MAJESTIC FIREPLACES Pre-Engineered Fireplace System related to environmental geographic conditions (such as, for example, nearby structures or roof peaks, trees, hills, or moun- tains), inadequate ventilation, or negative air pressure in the place where the Fireplace system is installed, related to any mechani- cal system (such as, for example, furnaces, fans, air conditioners, clothes dryers, etc.)

(5)Except as otherwise expressly specified in paragraphs A through D, NONE OF THESE WARRANTIES COVER, AND CFM CORPORATION SHALL NOT BE RESPONSIBLE FOR, ANY CON- STRUCTION, INSTALLATION, LABOR, TRANSPORTATION OR OTHER COSTS OR EXPENSES ARISING FROM A DEFECTIVE PART, ITS REPAIR OR REPLACEMENT OR OTHERWISE, NOR SHALL CFM CORPORATION IN ANY EVENT BE RESPONSIBLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM- AGES EXCEPT TO THE EXTENT REQUIRED BY LAW. Some states do not allow the exclusion or limitation of incidental or conse- quential damages, so this exclusion or limitation may not apply to you.

NO IMPLIED WARRANTIES, INCLUDING THE IMPLIED WAR- RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTIC- ULAR PURPOSE, SHALL REMAIN IN EFFECT AFTER THE EXPI- RATION OF THE WARRANTIES SET FORTH IN PARAGRAPHS A THROUGH D. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.

In order to obtain performance of any of the above warranty obligations write to CFM Corporation at this address:

CFM Corporation

2695 Meadowvale Blvd.

Mississauga, Ontario, Canada L5N 8A3 Attention: Director of Warranty Services

Since local building requirements may vary greatly throughout the country, users of CFM Corporation products should determine in advance whether there are any building code restrictions on the use of a specific product. CFM CORPORATION MAKES NO REP-

RESENTATION OR WARRANTY REGARDING, AND SHALL NOT BE RESPONSIBLE FOR, ANY BUILDING CODE COMPLIANCE.

The foregoing warranties give you specific legal rights and you may also have other rights which vary from state to state.

7412944

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents BR/BC Series Table of Contents Safety Information451162mm 45 1162mm 13mm BR42 Series specifications and framing BR42 Series Woodburning FireplaceFront Width Back Width Depth Chase InstallationIllustration Key 30˚ Elbow OffsetsTen Foot Rule Planning InformationMounting the Fireplace Planning the Chimney RunInsulating Fireplace Enclosure for Cold Climates InstallationChase Installation Chimney SupportsOption For Circulating Models Only Installing Electrical Wire For Circulator ModelsInstall Fan Kit Assembly FramingCutting the Hole Straight-Up Chimney InstallationOffset Installation Ceiling Chimney Hole Possible ObstructionsInstalling Outside Air Kit Positioning, Safety Strips Securing the FireplaceProper Firestop Spacer Installation Installing the Chimney SystemInstalling the Firestop Spacer Ceiling Hole Penetrating the Roof Continue Installing Pipe to Complete RunCanadian Requirements for Insulation Shield Additional CeilingsFinishing Finish Wall Install Remainder of Chimney SectionsInstalling Top Housing Or Termination Installing Chimney In a ChaseFacing Material Examples of wall shield insulation Hearth InstallationSide Wall Protection Example for Common Brick Recessed Installation BR/BC36 OnlyExample of Determining Hearth Extension Equiva- lents Gas line access Installing Line For Gas LogItem/Model Number BR/BC Series42GDKDP BR/BC42 AccessoriesRLTSK8 Chimney ComponentsChimney Components cont. Canada For Majestic Fireplaces PRE-ENGINEERED Fireplace Systems Limited Warranty & 30 Year Protection PlanCFM Corporation
Related manuals
Manual 24 pages 9.58 Kb

BC36, BC42, BR36, BR42 specifications

Vermont Castings is renowned for its high-quality, American-made gas stoves, particularly the BR36, BR42, BC42, and BC36 models. These gas-burning appliances are engineered to provide warmth and comfort while seamlessly blending into any home décor.

The BR36 is designed with versatility in mind, featuring a compact 36-inch size that makes it ideal for smaller spaces. It utilizes a 35,000 BTU burner that delivers impressive heat output, ensuring a cozy atmosphere year-round. The innovative burner technology provides direct venting options, ensuring efficient performance and minimal heat loss. The BR36 is further enhanced by Vermont Castings' unique premium cast iron construction, which radiates heat effectively for long-lasting warmth.

The BR42 offers a larger heating capacity, suitable for medium to larger rooms. With a 42-inch size, it boasts a BTU rating of up to 42,000, enabling it to warm expansive areas with ease. The advanced flame technology creates a realistic fire appearance while maintaining efficiency. This model also includes adjustable airflow settings, allowing users to customize the flame height and heat output according to preference.

The BC42 is a standout model that bridges the gap between modern aesthetics and traditional craftsmanship. With a contemporary design, it caters to homeowners who appreciate style without sacrificing efficiency. The BC42 maintains a high heat output with its efficient burner system, producing up to 35,000 BTUs. Its programmable thermostat provides convenience, allowing for precise temperature control and the ability to schedule heating times, making it user-friendly.

Finally, the BC36, like the other models, boasts outstanding features but in a more compact design. It is perfect for urban dwellers and those looking to optimize small living areas. The BC36 retains efficiency and style, providing up to 30,000 BTUs of heat output. This model also includes an easy-to-use control panel and a large viewing area that allows for excellent fire visibility, enhancing the ambiance of any room.

All four models feature Vermont Castings' commitment to sustainability, with many designs adhering to rigorous environmental standards and using clean-burning technology. These gas stoves are not only functional but also designed to enrich the home experience, proving that comfort and elegance can coexist effortlessly. With Vermont Castings' legacy of excellence, the BR36, BR42, BC42, and BC36 models are exceptional choices for anyone seeking reliable heating solutions.
Top Page Image Contents