Desa Tech CGN10TL Pressure Testing Heater GAS Connections, Manual Shutoff Valve

Page 15

CONNECTING TO GAS SUPPLY

Continued

4.Check all joints of gas supply piping system. Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak.

5.Correct all leaks at once.

Test Pressures Equal To or Less Than 1/2 PSIG

1.Close manual shutoff valve (see Figure 13).

2.Pressurize supply piping system by either using compressed air or opening main gas valve located on or near gas meter.

3.Check all joints from gas meter to manual shutoff valve (see Figure 14). Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak.

4.Correct all leaks at once.

PRESSURE TESTING HEATER GAS CONNECTIONS

1.Open manual shutoff valve (see Figure 13).

2.Open main gas valve located on or near gas meter.

3.Make sure control knob of heater is in the OFF position.

4.Check all joints from manual shutoff valve to control valve (see Figure 14). Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak.

5.Correct all leaks at once.

6.Light heater (see Operating Heater, pages 16 through 18). Check the rest of the internal joints for leaks.

7.Turn off heater (see To Turn Off Gas To Appliance, page 18).

8.Replace front panel.

Open

Manual

Shutoff

Valve

Closed

Figure 13 - Manual Shutoff Valve

Control Valve Location

Gas Meter

Manual

Shutoff

Valve

Figure 14 - Checking Gas Joints

15

103574

Page 14 Page 16
Image 15
Page 14 Page 16
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualContents Safety Information Piezo Ignition System Local Codes Unpacking Product FeaturesSafety Device Product IdentificationConfined and Unconfined Spaces AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionDetermining if You Have a Confined or Unconfined Space Determining AIR Flow for Heater LocationVentilation Air From Inside Building Ventilation AIRVentilation Air from Outdoors Ventilation Air From OutdoorsLocating Heater Installation ItemsNever install the heater A bathroom A recreational vehicle Check GAS TypeInstalling Heater to Wall Thermostat Sensing BulbMarking Screw Locations Folding Anchor Installing Two Mounting ScrewsPlacing Heater On Mounting Screws Connecting to GAS Supply Pressure Testing GAS Supply Piping System Connecting to GAS Supply Checking GAS ConnectionsManual Shutoff Valve Pressure Testing Heater GAS ConnectionsOperating Heater For Your Safety Read Before LightingPilot Shutting Off Burner Only pilot stays lit Shutting Off HeaterPilot Flame Pattern Inspecting BurnerCorrect Burner Flame Pattern Burner Flame PatternCleaning and Maintenance Trouble Shooting ODS/PILOT and Burner OrificeCabinet TROUBLE- Shooting Observed Possible Remedy Problem CauseCleaning and Mainte Top Ing statement atService Hints Technical ServiceBreakdown CGN10T CGN10TL Parts ListValve GA5010 Service Publications AccessoryParts Under Warranty Parts Not Under WarrantyParts Central 103574 103574 Keep this Warranty Warranty Information

CGN10T, CGN10TL specifications

The Desa Tech CGN10T and CGN10TL are innovative indoor gas heaters designed to provide efficient, reliable, and comfortable heating solutions for residential spaces. Their advanced features, modern technology, and user-friendly characteristics make them standout options for homeowners looking to enhance their indoor heating experience.

One of the prominent features of the CGN10T and CGN10TL models is their high heating capacity. With a maximum output of up to 10,000 BTUs, these heaters are capable of warming rooms quickly and effectively, ensuring a cozy atmosphere even in the coldest months. Their quiet operation adds to their appeal, allowing users to enjoy warmth without the disruptive noise often associated with traditional heating systems.

The CGN10T model comes equipped with a manual ignition system, offering simplicity and ease of use. Meanwhile, the CGN10TL features a convenient electronic ignition system, providing added convenience for users. Both models include an adjustable thermostat, enabling individuals to set their desired temperature for personalized comfort.

Desa Tech has integrated advanced safety features into these heaters, making them ideal for indoor use. The units are equipped with an automatic shut-off mechanism that activates in the event of low oxygen levels detected in the room, ensuring peace of mind for users. Additionally, a built-in safety valve is designed to prevent gas leakage, further enhancing safety in home environments.

The sleek and compact design of the CGN10T and CGN10TL allows for easy placement in various room layouts. Their versatile styling means they can blend seamlessly with existing décor, while their lightweight construction enables effortless relocation when necessary.

Energy efficiency is another hallmark of the Desa Tech CGN10T and CGN10TL models. They employ advanced technologies that ensure optimal fuel consumption, helping users save on energy costs while reducing their carbon footprint. The heaters utilize a natural gas source, which is often more cost-effective compared to electric heating systems.

In conclusion, the Desa Tech CGN10T and CGN10TL gas heaters offer a perfect combination of performance, safety, and efficiency. With their high heating capacity, user-friendly features, and modern safety technologies, these models are an excellent choice for anyone looking to create a warm, comfortable living space during the chilly months.
Top Page Image Contents