Electrical Connection, Grounding Instructions

SAFETY INFORMATION

DANGER

Electrical Connection

A 15-Amp, 120-Volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the log set will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 6 ft. (1.8 m) long three wire cord, exiting the right side of the log set. Plan the installation to avoid the use of an extension cord. Extension cords are for temporary use only. If an extension cord must be used, it must be UL/CSA certified, rated at 15A (1,875W), 125V maximum with 14 AWG minimum and constructed of two current carrying conductors with ground. A heavy duty extension cord with the shortest length possible for the connection is recommended and must not be longer than 50 ft. (15.2 m).

Do not coil or cover the extension cord.

Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical shock and injury to persons.

Do not use this log set if any part of it has been under water. Immediately call a qualified service technician to inspect the log set and replace any part of the electrical system which has been under water.

Grounding Instructions

This heater is for use on 120 volts. The cord has a plug as shown at (A) in Figure 1. An adapter as shown at (C) is available for connecting three-blade grounding-type plugs to two-slot receptacles. The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.

NOTE: Adapters are NOT for use in Canada.

ELCG 240, ELCG 347 specifications

Desa Tech is a renowned name in the field of electrical equipment and technologies, and among its notable products are the ELCG 240 and ELCG 347. These electric load control generators are designed to deliver superior energy management and enhanced operational efficiency, making them essential for various industrial applications.

The ELCG 240 is engineered for reliable performance in a wide range of electrical load control scenarios. One of its main features is its robust power output, capable of handling significant demand while maintaining efficiency. It is equipped with advanced load-sensing technology that allows for adaptive power allocation, ensuring that energy is distributed based on real-time requirements. This not only optimizes performance but also minimizes wastage and reduces operational costs.

Another standout feature of the ELCG 240 is its user-friendly interface, which allows operators to monitor performance metrics easily. The built-in diagnostic tools provide insights into operational efficiency and system health, enabling proactive maintenance and reducing downtime. Additionally, the ELCG 240 is designed for compatibility with various types of electrical loads, making it a versatile choice for different industries.

On the other hand, the ELCG 347 takes the innovations a step further. This model is known for its increased capacity and enhanced functionalities. It features multi-channel load management, allowing for simultaneous control of multiple loads, which is essential for complex industrial setups. The ELCG 347 also integrates advanced communication protocols, enabling seamless connectivity with existing industrial automation systems.

For energy efficiency, the ELCG 347 incorporates state-of-the-art inverter technology. This feature not only improves energy conversion efficiency but also enhances the quality of the power delivered, reducing harmonic distortion and improving overall system reliability. The model's thermal management system ensures that it operates optimally even under high load conditions, contributing to its longevity and reliability.

Both the ELCG 240 and ELCG 347 are designed with robust construction to withstand demanding environments. They comply with international safety and performance standards, ensuring peace of mind for users. With their unique features, technologies, and characteristics, the Desa Tech ELCG series represents a significant leap in electric load control solutions, promising improved efficiency, cost-effectiveness, and reliability for various industrial applications. As the demand for energy-efficient technologies grows, the ELCG series stands out as an investment in sustainability and performance.