Desa Tech S26NTA, S26PTA Product Identification, Vent-Free Freestanding Pedestal Stove

Page 4

SAFETY INFORMATION

Continued

1.This appliance is only for use with the type of gas indicated on the rating plate. This appli- ance is not convertible for use with other gases.

2.Do not place propane/LP supply tank(s) in- side any structure. Locate propane/LP supply tank(s) outdoors (propane/LP gas units only).

3.If you smell gas

•shut off gas supply

•do not try to light any appliance

•do not touch any electrical switch; do not use any phone in your building

•immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

•if you cannot reach your gas supplier, call the fire department

4.This heater shall not be installed in a bedroom or bathroom.

5.Do not use this heater as a wood-burning heater. Use only the logs provided with the heater.

6.Do not add extra logs or ornaments such as pine cones, vermiculite, or rock wool. Using these added items can cause sooting. Do not add lava rock around base. Rock and debris could fall into the control area of heater. After servicing, always replace screen before oper- ating heater.

7.You must operate this heater with the heater screen in place. Make sure heater screen is in place before running heater.

8.This heater is designed to be smokeless. If logs ever appear to smoke, turn off heater and call a qualified service person. Note: During ini- tial operation, slight smoking could occur due to log curing and heater burning manufactur- ing residues.

9.To prevent the creation of soot, follow the instructions in Cleaning and Maintenance, pages 16 and 17.

10.Before using furniture polish, wax, carpet cleaner, or similar products, turn heater off. If heated, the vapors from these products may create a white powder residue within burner box or on adjacent walls or furniture.

11.This heater needs fresh air ventilation to run properly. This heater has an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and

Ventilation, pages 5 through 7. If heater keeps shutting off, see Troubleshooting, pages 18 through 21.

12.Keep all air openings in front and bottom of heater clear and free of debris. This will in- sure enough air for proper combustion.

13.Do not run heater

•where flammable liquids or vapors are used or stored.

•under dusty conditions.

14.Do not use this heater to cook food or burn paper or other objects.

15.Do not use heater if any part has been under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

16.Turn off and unplug heater and let cool be- fore servicing. Only a qualified service per- son should service and repair heater.

17.Operating heater above elevations of 4,500 feet could cause pilot outage.

18.Do not operate heater if any log is broken. Do not operate heater if a log is chipped (dime- sized or larger).

19.To prevent performance problems with pro- pane/LP units, do not use propane/LP fuel tank of less than 100 lbs. capacity.

20.Provide adequate clearances around air openings.

PRODUCT

IDENTIFICATION

Stove

Cabinet

Screen

Logs

Heater Controls

(Inside Door)

Figure 1 - Vent-Free Freestanding

Pedestal Stove

4

www.desatech.com

110361-01E

Page 3 Page 5
Image 4
Page 3 Page 5
Contents What to do if YOU Smell GAS Thermostatically Controlled Models S26PTA and S26NTATable of Contents Safety Information Product Identification Vent-Free Freestanding Pedestal StoveProduct Features Local CodesUnpacking AIR for Combustion VentilationConfined and Unconfined Space Determining FRESH-AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space Installation Ventilation AIRVentilation Air From Inside Building Ventilation Air From OutdoorsClearances to Combustibles Check GAS TypeMinimum Wall and Ceiling Clearances see Figure Connecting to GAS Supply Installation Items NeededPressure Testing Gas Supply Piping System Checking GAS ConnectionsPropane/LP NaturalInstalling Logs Pressure Testing Heater Gas ConnectionsInstalling Blower Accessory GA3750 Installing One-Piece Log set Top ViewInstalling Blower Control Housing Operating Heater For Your Safety Read Before LightingLighting Instructions Inspecting Burners Cleaning Maintenance Burner Injector Holder and Pilot AIR Inlet HoleTechnical Service Service HintsSpecifications Troubleshooting Observed Problem Possible Cause RemedySee Cleaning and Mainte Heater produces a whistling Gas leak. See Warning Statement aboveIllustrated Parts Breakdown Parts List Models S26PTA and S26NTA KEY Description QTY Replacement Parts AccessoriesParts Central Keep this Warranty Warranty InformationLimited Warranty VENT-FREE GAS Pedestal Stove

S26NTA, S26PTA specifications

Desa Tech has been making significant strides in the world of wireless communication, particularly with their offerings of the S26PTA and S26NTA models. These cutting-edge devices are designed to meet the growing demands for high-performance connectivity in various applications.

The S26PTA model is a powerhouse of capabilities, particularly suited for industries requiring reliable data transmission. Its main feature includes an impressive range, allowing it to cover vast distances while maintaining a robust connection. The S26PTA employs advanced signal processing algorithms which enhance its performance in challenging environments, ensuring minimal interference and optimal data integrity. This makes it ideal for applications that require consistent connectivity, such as in remote monitoring systems or industrial automation.

On the other hand, the S26NTA focuses on versatility and ease of integration. It comes equipped with multiple connectivity options, supporting both wired and wireless protocols. This flexibility allows businesses to seamlessly adapt the device to their existing infrastructure without the need for significant modifications. Furthermore, the S26NTA is designed with energy efficiency in mind, which is crucial for applications where power consumption is a concern, such as in IoT devices.

Both models integrate state-of-the-art security features to protect sensitive data. With end-to-end encryption and robust authentication protocols, Desa Tech ensures that users can trust the integrity of their communications. This is particularly significant in fields that handle confidential information, as it mitigates the risk of unauthorized access and data breaches.

In terms of user experience, both the S26PTA and S26NTA are designed with intuitive interfaces and straightforward setup processes. This user-centric design philosophy reduces the technical barrier for businesses looking to implement advanced communication technologies. Furthermore, regular software updates are provided to enhance functionality and ensure that users benefit from the latest technological advancements.

In summary, the Desa Tech S26PTA and S26NTA devices exemplify the future of wireless communication technology. With their advanced features, robust security measures, and user-friendly designs, they are well-equipped to handle the demands of modern applications. Whether for industrial automation, IoT, or other communication needs, these models offer reliable and efficient solutions that stand out in the competitive tech landscape.
Top Page Image Contents