Presetting the Radio Stations

You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum.

1.Press FUNC. on the front panel or FUNCTION on the remote control to select the frequency (AM or FM) you want.

2.Select a station you want by pressing TUN. (-/+) buttons.

Tuning automatically

-Press TUN. (-/+) for more than 0.5 second. Scanning stops when the unit tunes in a

station.

Tuning manually

- Press TUN. (-/+) briefly and repeatedly.

3.Press PROGRAM/MEMO on the remote control.

A preset number will flash in the display window.

4.Press PRESET ( / ) on the remote con- trol to select the preset number you want.

5.Press PROGRAM/MEMO again. The station is stored.

6.Repeat steps 1 or 2 - 5 to store other stations.

To delete all the memorized stations Press and hold PROGRAM/MEMO on the remote control for about two seconds, “CLEAR ALL” appears in the display window and then PROGRAM/MEMO on the remote control again, the stations are deleted.

For your reference

If all stations have already been entered, “MEM FULL” message will appear in the display win- dow for a moment and then a preset number will flash. To change the preset number, follow steps 4-5.

To recall presets

Press and hold PRESET ( / ) on the remote control until the desired preset number appears or press it repeatedly.

Listening to the Radio

1.Press FUNC. on the front panel or FUNCTION on the remote control to select the frequency (AM or FM) you want.

The last received station is tuned in.

2.Press PRESET ( / ) on the remote con- trol repeatedly to select the preset station you want.

-Each time you press the button, the unit tunes in one preset station at a time.

3.Adjust the volume by rotating VOLUME CONTROL KNOB (or pressing VOLUME

( / ) on the remote control) repeatedly.

To listen to non-preset radio stations

•For manual tuning, see “Tuning manually” in step 2 on left.

•For automatic tuning, see “Tuning automati- cally” in step 2 on left.

To turn off the radio

Press POWER ( ) to turn the unit off or select another function mode (CD/MP3, AUX, USB).

For your reference

• If an FM program is noisy

Press MONO/ST. so that “STEREO” disap- pears in the display window. There will be no stereo effect, but the reception will improve. Press MONO/ST. again to restore the stereo effect.

• To improve reception Reposition the supplied antennas.