CD Playback

Basic Playback

1.Press FUNC. (or FUNCTION) button to select CD/MP3 function.

If no disc is loaded then “NO DISC” is displayed.

2.Press Z OPEN/ CLOSE and place the disc into the disc tray.

ote

To load an 8cm (3 inch) disc, put it onto the inner circle of the tray.

3.Press Z OPEN/ CLOSE to close the disc compartment.

Audio CD: “READING” appears in the display window, and then the total number of tracks and the playing time are displayed.

MP3 CD: “READING” appears in the display window, and then the total number of files is displayed.

4.Press PLAY (B) on the front panel or PLAY/

PAUSE (B/[]) on the remote control.

In addition, you can also play an Audio CD or MP3 CD using the NUMBER buttons.

Pause Playback

Press SET/CD[] on the front panel or PLAY/ PAUSE (B/[]) on the remote control during play- back.

Press this button again it to resume play.

Stop Playback

Press STOP(x) on the front panel or CD STOP(x) on the remote control during playback.

Skipping a Track

•Press the BB > button to go to the next track.

•When the . bb button is pressed once midway through a track, the player returns to the start of that track. When it is pressed again, a track is skipped each time the button is pressed.

Searching a Track

After pressing and holding . bb/BB > button on the remote control during playback, then release at the point you want.

ote

This function is not available to play a MP3 file.

Program Play

You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks.

1.Press PROGRAM/MEMO on the remote control on the stop mode.

2.Press . bb/BB > to select the track. EX) “04 P-01” will be shown in the display.

Program number

Track number

3.Press PROGRAM/MEMO on the remote control.

4.Repeat 1~3.

5.Press PLAY (B) on the front panel or PLAY/

PAUSE (B/[]) on the remote control. “PROG.” appears in the display window.

To check program contents

Press PROGRAM/MEMO on the remote control on the stop mode.

- A Track and program number will be displayed.

To clear program contents

Press PROGRAM/MEMO on the remote control on the stop mode. And then press CD STOP(x) on the remote control.

To add program contents

1.Press PROGRAM/MEMO on the remote control repeatedly on the program stop mode until Track Number blinks.

2.Repeat 2~4 on above.

To modify program contents

1.Press PROGRAM/MEMO on the remote control to display program number you want to modify.

2.Repeat 2~4 on above.

title

title Operation Operation

title