Operation
Figure 5 |
|
|
|
|
A | B | C | E | D |
|
|
Electric Fireplace Manual
Controls (Figure 5)
The manual controls for the fireplace are behind the access panel located at the bottom of the fireplace.
A.Three Position On/Off Switch
The switch has two (2) on positions marked with “ I ” and
“II ”. The “ I ” position is for manual operation. In this position the
“II ” position the unit is operated with the ON and OFF buttons of the remote control. When the switch is in the center “ O ” position the unit is off.
B. Flame Action Control 
Turn the Flame Action Control knob to adjust the flame speed to the desired level.
C. Light Dimmer Control 
Turn the Light Dimmer Control knob to increase or decrease the brightness of the interior of the fireplace.
D. Heater On/Off Switch
The Heater On/Off Switch supplies power to the heating unit when the Three Position On/ Off Switch (A) is on (“ I ” or “ II ” positions).
E. Heater Thermostat Control 
To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the way to turn on the heater. When the room reaches the desired temperature, turn the thermostat knob counter clockwise until you hear a click. Leave in this position to maintain the room temperature at its setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on.
11