Built-In Instructions:
WARNING
The installation of the fireplace unit must comply with the applicable local and/or national electrical codes and utility requirements. This installation should be entrusted to duly qualified personnel where required by law.
1.Leave the frame uninstalled from the fireplace chassis until step 13.
2.Prepare a wall opening following the dimen- sions shown in Figure 5. Note that 4" minimum depth including thickness of dry wall is required. Make sure there is enough clearance for the cable coming out from the bottom of the fire place.
Figure 5
NOTE
Where there are close tolerances involved in wall building or applications which require a great degree of precision, we recommend that the product itself be used to make the actual measurements for the wall opening. Dimplex North America will not be responsible for inaccuracies in the design or manufacture of enclosures.
9