Dimplex BLF50 owner manual Surface Installation

Page 12

Fireplace Installation

16.Refer to Front Glass Installation section, page 16 for final installation procedures.

Surface Installation

CAUTION: Two people may be required for various steps of this procedure.

1.Choose a location which has a minimum of two (2) wall studs available for mounting.

2.Choose your method of supplying power to the unit:

Plug in to an existing outlet or install an outlet nearby.

Hard wire the fireplace. Follow the hard wiring instructions on page 9.

WARNING: Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.

Ensure that the On/Off Switch is set to the Off position (refer to Operation section) and that the circuit on which the fireplace is to be installed has the power cut off at the service panel until installation is complete.

3.Remove the partially reflective glass from the

fireplace:

Lay fireplace on its back.

Remove two (2) Phillips screws from each of the two

(2) glass brackets (Figure 2, page 9).

Remove glass brackets.

With one hand keeping pressure on the partially reflective glass, tilt the fireplace upright and slightly forward to allow the partially reflective glass to fall out of the inside framing.

CAUTION: Partially reflective glass is not tempered. Do

not bump or drop the partially reflective glass to avoid breakage and personal injury.

Remove partially reflective glass from fireplace.

4.Position the fireplace on a wall at the position where it will be mounted (Figure 9). Use a bubble level (one is supplied) to ensure that fireplace is level on the wall.

5.Ensuring that at least two (2) key-holes line up with a wall stud (key-holes are spaced at four (4) inch (10.2 cm) centers), mark the location of four (4) screw locations on

12

www.dimplex.com

Image 12
Contents BLF50 Table of Contents Welcome & Congratulations Please carefully read and save these instructionsImportant Instructions Important Instructions Important Instructions Quick Reference Guide Fireplace Installation Site SelectionHardwire Installation Front Panel Front Panel tabs Electrical box Screw Install using screws removed in steps Surface Installation In-wall Recessed Installation 2x4 Framing 4 Framing Flush Mounted Installation 2x8 Framing Front Glass Installation Mounts 4 Hooks Tab On/Off Switch Position SwitchOperation Manual Control ButtonsRemote Control Initialization/ Reprogramming Remote Control UsageMaintenance Battery ReplacementWarranty Products to which this limited warranty appliesWhat Dimplex will do in the event of a defect Accessories Wall Switch Remote Control WRCPF-KITReplacement Parts

BLF50 specifications

The Dimplex BLF50 is an innovative electric fireplace that combines aesthetics, technology, and functionality, making it a standout choice for modern homes. This electric fireplace not only serves as a source of heat but also transforms your living space with its stunning visual appeal. One of its main features is the impressive large viewing area, which is framed by a sleek, contemporary design. The BLF50 boasts a realistic flame effect, creating the appearance of a traditional wood-burning fire while eliminating the need for a chimney or vent.

Central to the BLF50's appeal is its patented Opti-Myst technology, which produces lifelike flames and smoke using water vapor. This cutting-edge feature allows the fireplace to look more realistic than conventional electric flame simulations. The ambient glow from the logs adds depth and warmth, enhancing the overall experience. This technology is not only visually appealing but also environmentally friendly, as it does not release harmful emissions into the atmosphere.

Another notable characteristic of the Dimplex BLF50 is its versatility in installation. It can be mounted on the wall, which saves floor space and provides a modern aesthetic. The fireplace can also be incorporated into various design schemes, from traditional to contemporary, ensuring it complements any decor. It operates with a simple remote control, providing the convenience of adjusting heat settings and flame intensity at your fingertips.

The Dimplex BLF50 also features energy-efficient heating capabilities, generating up to 5,000 BTUs of heat, sufficient to warm spaces up to 400 square feet. With options for adjustable heat settings, users can easily tailor the warmth according to their preferences. This fireplace offers both a low-heat setting designed for ambient warmth and a high-heat setting for cooler days.

In addition to its practical benefits, such as easy installation and operation, the Dimplex BLF50 is designed with safety in mind. It includes an automatic shut-off feature that activates if the unit becomes too warm, ensuring peace of mind for users. With a blend of style, functionality, and safety features, the Dimplex BLF50 epitomizes the modern electric fireplace, making it an ideal choice for enhancing any living space.