Dimplex 30" FIREPLACE Fireplace Insert Installation, Operation, Initializing The Remote Control

Page 8

DIMPLEX MANTEL SURROUND KIT OR CUSTOM MADE MANTEL SURROUND

1.Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic.

2.Place the fireplace in the desired location to see how it will look in the room.

3.For ease of electrical hook up you may wish to locate the fireplace near an existing outlet. (refer to NOTE 1)

4.Store the fireplace in a safe dry and dust free location.

5.Assemble the mantel surround kit (refer to the mantel assembly instructions) or construct the custom surround with an opening of 30 ½” X 11 ¾ ” X 25 ¾”

WARNING

Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.

FIREPLACE INSERT INSTALLATION

1.Make sure the units MAIN ON/OFF switch is switched OFF (refer to operating instruction section).

2.Plug the unit into a 15Amp/120volt outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1875 watts.

3.Push the fireplace into the opening being careful not to damage the base of the mantel or cabinet so that the fireplace is flush with the mantel or cabinet.

4.Level the unit with shims if necessary (not provided).

5.Install the trim onto the fireplace (refer to trim installation instructions).

WARNING

Ensure the power cord is not installed so that it is pinched or against a sharp edge and ensure that the power cord is stored or secured to avoid tripping or snagging to reduce the risk of fire, electric shock or injury to persons.

OPERATION

Initializing The Remote Control

1.Turn on the electrical power at the circuit breaker.

2.Slide open the battery cover on the back of the remote transmitter.

3.Install three AAA batteries into the remote control. Replace the battery cover.

Note:

The LCD display will flash when new batteries are inserted.

4.Move the remote transmitter close to the fireplace (less than five feet preferred). Press any button on the remote control. The remote is transferring the code to the receiver built into the fireplace.

5.Set the clock by depressing the button marked clock on the transmitter for five seconds. The hour display will flash.

6.Use the up and down buttons to set the hour.

7.Press the clock button again and the minute display will flash.

8.Use the up and down buttons to set the minute.

9.Press the clock button again and the 0F or 0C display will flash.

10.Use the up and down buttons to select the remote to display temperature in 0F or 0C

11.Press the clock button again. The remote control is now ready for operation.

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Fireplace Contents Quick Reference Guide for the Dimplex Electric Fireplace Please Retain this USER’S Guide for Future Reference Firebox Carton Site Selection and Preparation Existing Fireplace Installation NEW Wall ConstructionFireplace Insert Installation Initializing The Remote ControlOperation Dimplex Mantel Surround KIT or Custom Made Mantel SurroundRemote Control Operation Auto ModeTimer Mode Child Proof FunctionTo change code BatteriesCode selection Resetting the Temperature Cutoff Switch Electric Fireplace Manual Controls Manual on/off switchHeater override switch Flame brightness controlMaintenance Light Bulb ReplacementTo open the light bulb area To replace the bottom light bulbsGlass Cleaning Fireplace Surface CleaningLower Light Bulb Requirements Upper Light Bulb RequirementsFive Year Limited Warranty Products to which this limited warranty appliesWhat this limited warranty does not cover Dimplex How State and Provincial law apply

30" FIREPLACE specifications

The Dimplex 30" Fireplace is a stunning centerpiece that combines innovative technology with a sleek design, making it an attractive option for both modern and traditional homes. This electric fireplace offers the warmth and ambiance of a traditional fireplace without the hassle of venting, making it a versatile choice for various spaces.

One of the standout features of the Dimplex 30" Fireplace is its advanced LED flame technology. This innovative system creates a realistic flame effect that can be adjusted to suit your preferences. The multi-color flame options allow users to customize the fire's appearance, from a soothing blue hue to a more traditional orange glow, providing a personalized touch to your living space.

The fireplace is designed with a powerful heating element that can efficiently warm rooms up to 1,000 square feet. With a simple flick of a switch, users can enjoy the warmth of the fireplace, which features a built-in thermostat to maintain the desired temperature. This not only enhances comfort but can also contribute to energy savings, as the unit can be used independently of the home’s central heating system.

Safety is a priority in the design of the Dimplex 30" Fireplace. The unit is equipped with a thermal overload protector, ensuring that it does not overheat, while the glass front remains cool to the touch, eliminating burn hazards associated with traditional fireplaces. The remote control feature adds convenience, allowing you to adjust settings from the comfort of your couch.

The fireplace’s contemporary design is enhanced by its sleek finish and stylish mantel options, making it a great fit for any décor. Its compact size means it can easily fit into smaller rooms, apartments, or even as an additional heating solution in larger spaces.

Installation is straightforward, requiring no venting or gas lines, making it an ideal choice for renters or those looking to add a hassle-free heating option to their home. With its combination of aesthetics, efficiency, and safety features, the Dimplex 30" Fireplace is an excellent investment for anyone looking to enhance their living environment with the charm and comfort of a fireplace.
Top Page Image Contents