Connecting 23
Resolution Setting
The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUTPUT jacks. You can change the resolution using [Setup] menu.
1.Press HOME (n).
2.Use A/Dto select the [Setup] and press ENTER (b). The [Setup] menu appears.
3.Use W/Sto select [DISPLAY] option then press Dto move to the second level.
4.Use W/Sto select the [Resolution] option then press ENTER (b) to move to the third level.
5.Use W/Sto select the desired resolution then press ENTER (b) to confirm your selection.
,,Note
yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows:
1. Press Bto open the disc tray.
2 Press Z(STOP) for more than 5 seconds.
yy Since several factors affect the resolution of video output, see “Video Output Resolution” on page 67.
Antenna connection
Connect the supplied antenna for listening to the radio.
Rear of the unit
,,Note
After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.
2
Connecting