30System Setting
3
System Setting
Settings
Adjust the Setup Settings
You can change the settings of the player in the [Setup] menu.
1.Press HOME (n).
2.Use A/Dto select the [Setup] and press ENTER (b). The [Setup] menu appears.
3.Use W/Sto select the first setup option, and press Dto move to the second level.
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is set to higher than 720p.
4.Use W/Sto select a second setup option, and press ENTER (b) to move to the third level.
5.Use W/Sto select a desired setting, and press ENTER (b) to confirm your selection.