LG Electronics NB4530A Basic operations, Other operations, USB operation, AV Sync, Operating

Operating 19

Basic operations Other operations

USB operation

1.Connect the USB device to the USB port.

2.Select the USB function by pressing FUNCTION.

3.Select a file you want to play by pressing Cor V.

DRC (Dynamic Range Control)

Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DRC.

To		Do this
Stop	Press Z.
Playback	Press d/M.
Pause	During playback, press d/M.
	During playback, press C
	or Vto go to the next file
Skip to the next/	or to return to the beginning
previous file	of the current file.
	Press Ctwice briefly to
	step back to the previous file.
Search for a	Press and hold C/V
	during playback and release it
section within a
	at the point you want to listen
file
	to.
	Press REPEAT on the remote
	control repeatedly, the
Play repeatedly	display will be changed in the
or randomly	following order, RPT 1			RPT
	D (DIRECTORY)		RPT ALL
	RANDOM	OFF.
Select a file	Press 0 to 9 numerical buttons
	on the remote control to go
directly
	to the desired file		directly.
Resume	The unit memorizes the point at
	which you've changed function
playback
	or the unit had been turned off.

AV Sync

When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time.

1.Press AV SYNC.

2.Use C/Vto scroll up and down through the delay amount, which you can set at anything between 0 and 300ms.

3

Operating

,,Note

The resume point may be cleared when you pull out the power cord or removing the USB device from the unit.