20Operating
3
Operating
AUTO POWER On/Off
Before operating this function, make sure that you have selected OPTICAL and turn on the AUTO POWER.
This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player,
Display | Operation | |
|
| |
AUTO POWER ON | AUTO POWER function is | |
turned on. | ||
| ||
|
| |
AUTO POWER OFF | AUTO POWER function is | |
turned off. | ||
| ||
|
|
,,Note
yy This function is intentionally designed to turn off the unit after 1 minute of inactivity in OPTICAL mode. Only if the unit has already received the signal transmitted through the optical source and there is no digital audio signal going to the unit, the unit will turn off after 1 minute of inactivity with AUTO POWER function is turned on.
yy Depending on the connected device by the optical cable, this function may not operate.
yy If you want to use AUTO POWER, SIMPLINK must be turned off. It takes for about 30 seconds to switch on or off SIMPLINK.
yy If SIMPLINK is set to ON, "AUTO POWER OFF" is just scrolled, even thouth you press AUTO POWER.
yy Once AUTO POWER is set, the unit will start as OPTICAL mode automatically next time, no matter what kind of function you selected before.
Auto Power Down
This unit will be off itself to save electronic consumption in the case main unit is not connected to external device and is not used for 25 minutes.
So does this unit after six hours since Main unit has been connected to other device using analog input.
But the unit can turns on automatically based on the [AUTO POWER] function you've set.
Turn off the sound temporarily
Press MUTE@to mute your unit.
You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window.
To cancel it, press MUTE@again on the remote control or change the volume level.
Displaying file and input source
You can display various information of the input source by pressing INFO.
USB : MP3/WMA containing file information
OPTICAL/ARC/HDMI IN : Audio format, Audio channel