18Connecting
USB playback
Connect USB memory device to the USB port on the back of the unit.
With the unit on the wall, you can connect USB more easily using supplied USB cable.
Compatible USB devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive : Devices that support USB1.1.
yy The USB function of this unit does not support some USB devices.
2
Connecting
Removing the USB Device from the unit.
1.Choose a different function/mode or press Ztwice in a row.
2.Remove the USB device from the unit.
Playable file
MP3/ WMA file requirement
MP3/ WMA file compatibility with this unit is limited as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA)
yy Maximum files : Under 999
yy File extensions : “.mp3”/“.wma”
yy A protected file by DRM(Digital rights management) cannot be played on the unit.
USB device requirement
yy The file name is limited to 255 characters.
yy Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.)
yy Depending on the size and the number of the files, it may take several minutes to read the contents on the media.
yy Devices which require additional program installation connected to a computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a few minutes to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the USB device is not recognized.
yy This unit is not supported when the total number of files is 1000 or more.
yy External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
yy The unit’s USB Port cannot be connected to PC. The unit can not be used as a storage device.