Weber 98583 owner manual Add fuel scale assembly, Install igniter

Page 14

Step 10

Add fuel scale assembly

You will need: fuel scale assembly, two 1/4-20 wing nuts and two nylon washers.

Slip the bolts on the back of the fuel scale assembly through the two small holes in the tank panel. Make sure indicator rod of fuel scale is on the left side of the wheel frame.

Add washers then wing nuts and tighten. Figure 12.

 

E

 

E

 

F

 

F

View from front left

View from front right

Figure 12

Step 11

Install igniter

Note - The igniter wires are already attached to the Gas Catcher Ignition Chamber and the igniter. This was done to factory test the ignition system.

The igniter lock nut is on the igniter.

Insert the top of the igniter up through the large part of the keyhole in the frame brace. Figure 13 (b). Loosen the igniter lock nut and slide the igniter into the small part of the keyhole. Figure 13 (c). Tighten the igniter lock nut. Figure 13.

Note - If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers.

(a)

Frame brace

(b)

Keyhole in

Igniter lock nut

frame brace

 

Figure 13

(c)

Frame brace

Small part of keyhole in frame brace

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Spirit 700 Series MDANGER MWARNINGS LP GAS Units onlyWarranty Patents and Trademarks Contents Storage For Installation in CanadaGeneral Instructions Operating areaStep AssemblyCheck package contents REB Check contents of hardware packs Assemble wheel frame Assemble top frameAdd front panel Continue frame assemblyInstall tubing plugs Add cooking box Install manifold bracket Add fuel scale assembly Install igniterFill LP tank MCAUTION Do not remove adjustment wing nut from tank scaleSet LP fuel scale Check that all burner valves are off Connect LP tankMWARNING Do not ignite burners when leak checking Check for gas leaksInstall Flavorizer Bars and Cooking Grates Install the bottom trayInstall Lid Add tool holders, control panel and burner control knobsInstall Swing Table MWARNING The load limit for the swing table is 30 poundsComplete accessory installation Lighting To ExtinguishManual Lighting Storage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseRemoval of the LP tank Connecting the filled LP tankRefilling the LP tank Male fitting Regulator Safe handling tips for LP Gas Liquid Propane LP TanksMWARNING Do not ignite burners while leak checking Annual MaintenanceInspection and Cleaning of the Weber Spider Stopper Guards MCAUTION Do not enlarge the burner ports when cleaning General MaintenanceMain Burner Cleaning Procedure Weber Spider Stopper GuardsTo reinstall the burners, reverse steps c through g Crossover Ignition System Operations Burner does not light, or flame is low in High position MCAUTION Do not line the bottom tray with aluminum foilPage 12-13 Parts List Final Word Thanks

98583 specifications

The Weber 98583 is a highly regarded grill cover designed to enhance the durability and longevity of your Weber gas grill. Engineered specifically to fit various models, this cover stands out for its exceptional construction and user-friendly features.

One of the main characteristics of the Weber 98583 is its heavy-duty material. Made from a high-quality, weather-resistant fabric, this cover provides robust protection against the elements. From intense sunlight to heavy rain and snow, it shields your grill from UV rays, fading, and moisture, ensuring that it remains in pristine condition over time. The material is also breathable, preventing moisture buildup that can lead to mildew and corrosion.

Another standout feature is the fitted design of the cover. It is tailored to snugly fit Weber gas grills, minimizing the chance of it blowing away in windy conditions. The precise fit not only enhances its aesthetic appeal but also adds to its protective capabilities, keeping dust, dirt, and debris at bay.

The Weber 98583 is equipped with convenient fastening straps that further secure the cover in place, making it ideal for outdoor use in varying weather conditions. These straps and the elastic hem cord provide a customizable fit, ensuring that the cover remains tightly secured around the grill.

In terms of maintenance, the Weber 98583 requires minimal care. Its durable fabric is easy to wipe clean, and the waterproof nature ensures that it doesn't absorb water. For deeper cleaning, it can simply be rinsed with a garden hose and air-dried, maintaining its functionality without extensive effort.

Additionally, the design of the Weber 98583 incorporates ventilation openings that prevent wind lofting and allow moisture to escape. This thoughtful design feature contributes to a longer lifespan for your grill, as it reduces the risk of rust formation.

In summary, the Weber 98583 is a top-quality grill cover that effectively combines protection, durability, and user-friendly features. Its heavy-duty material, snug fit, fastening straps, and ventilation openings make it an essential accessory for any Weber gas grill owner looking to safeguard their investment while enjoying outdoor cooking for years to come. Whether it’s rain, snow, or sunlight, the Weber 98583 ensures that your grill remains protected and ready for your next barbecue.
Top Page Image Contents