Replacing Gasket, FAN Maintenance | Waterford Appliances E63-NG1

MAINTENANCE

	Replacement Part	NOTE: the unit MUST NOT be operated
	# 940-087 Emerald Glass	without the fan access panel se-
	WARNING: Do not operate appli-	curely in place and correctly sealed.
	WARNING: Do not operate appli-	IMPORTANT: These fans collect a
	ance with glass panels removed,	IMPORTANT: These fans collect a
	cracked or broken. Replacement of	lot of dust from within your home.
	the glass should be done by a li-	Ensure you maintain these fan mo-
	censed or qualified service person.	tors on a regular basis by vacuum-
		ingoutthefansquirrelcages,around
	Note: Wearing gloves will protect your	the motor, and around the grills on
	hands while handling glass.	the back of the stove.

3)Disconnect gas line to stove.

4)Disconnect 3/8" NPT pipe from 90o elbow on valve.

5)Disconnect the two (2) switch wires from valve.

REPLACING THE

GASKET

The Emerald has 3/8" fiberglass gasket in the front door. Should it ever need replacement, use only the proper replacement gasket that is available from your Waterford dealer. To re- place the gasket, follow this procedure.

1)Open the front door (see instructions above in Glass Replacement 1)).

2)Remove the existing gasket and clean its channel with a scraper or wire brush.

3)Lay a thin bead of gasket cement the entire length of the channel.

4)Lay the gasket in the channel with sufficient pressure that it stays in place. Trim the excess from the end of the gasket so that it butts snugly against the other end without leaving a gap.

5)Close the door and apply firm pressure to seat the gasket evenly throughout.

FAN MAINTENANCE

If your fan requires maintenance or replace- ment, access to the fan is through the plate on the rear wall of the firebox.

IMPORTANT

Disconnect power supply

before servicing

WARNING:

Electrical Grounding Instructions This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

To replace fan: See the fan installation instructions on page 7 and reverse the steps.

REMOVING VALVE

If your valve requires maintenance or replace- ment, use the following instructions:

Note: Always close off the gas supply before removing the valve.

1)If optional fan is installed, disconnect pow- er source to stove.

2)Remove access panel.

6)Disconnect piezo wire.

7)Open the front door. Open the right side door and there is a cutout in the heat shield through which can be seen a wing nut threaded on to a stud attached to the front door. Loosen this nut by turning it counter- clockwise.

8) Carefully remove the logs, embers and rockwool.

9)Remove burner. See diagram below.

Note: Use a magnetic type screwdriver if possible.

18	Waterford E63-1 EMERALD Freestanding Gas Stove

E63-NG1 specifications

Waterford Appliances has long been synonymous with quality and innovation in the kitchen appliance sector. Their E63-NG1 model embodies this legacy, combining cutting-edge technology with user-friendly design to deliver an exceptional cooking experience.

The E63-NG1 is a gas range that stands out for its stunning appearance, featuring a robust stainless steel finish that not only enhances durability but also adds a touch of elegance to any kitchen. Its sleek design is complemented by heavy-duty cast iron grates, which provide a stable cooking surface that easily supports pots and pans of various sizes.

One of the standout features of the E63-NG1 is its powerful burners. The range boasts a total of five burners, including a high-output burner that generates up to 18,000 BTUs, allowing users to achieve rapid boiling and high-heat searing. Additionally, the other burners, with a variety of BTUs ranging from 6,000 to 15,000, offer versatility for simmering, sautéing, and delicate cooking tasks. This array of burners ensures that home chefs have the flexibility to tackle multiple dishes simultaneously, enhancing overall cooking efficiency.

The E63-NG1 is equipped with a spacious oven that provides ample cooking space, accommodating large roasts and multiple trays. The oven features advanced convection technology, which ensures even heat distribution for perfectly baked goods, while reducing cooking times. The inclusion of multiple oven modes, including bake, broil, and a specialized pizza mode, adds to the appliance's versatility, making it an ideal choice for various culinary styles and preferences.

Another notable characteristic of the E63-NG1 is its user-friendly digital controls. The intuitive interface allows for precise temperature settings and timing, making cooking more straightforward and enjoyable. Additionally, the oven includes dual interior lights, ensuring that users can easily monitor their food without opening the door, which helps maintain optimal cooking temperatures.

Safety is also a priority in the E63-NG1 design. It features an automatic shut-off function that activates if the oven is left on for an extended period, giving users peace of mind. The appliance also offers a reliable ignition system that ensures a quick and safe start every time.

In summary, the Waterford Appliances E63-NG1 is a perfect blend of style, functionality, and safety. With its powerful burners, spacious oven, and innovative technologies, this gas range stands out as an excellent addition to any kitchen, catering to both day-to-day meals and special culinary projects alike. Whether you're a novice home cook or an experienced chef, the E63-NG1 delivers the performance and reliability needed to inspire culinary creativity.