Avalon Stoves DVS Insert EF II Finalizing the Installation, Glass Frame Removal and Installation

Page 21

Finalizing the Installation

21

Glass Frame Removal and Installation

Warning: The appliance must be completely cool before removing the glass.

Warning: Do not strike or slam the glass.

a

Open the four latches holding the glass

Spring Pin

 

frame in place (start with the two below

Top of

 

the glass) - follow the directions shown

 

Firebox

 

to the right.

 

 

 

Glass

Insert the 1/4” key into the spring pin.

Twist 1/4 turn.

Glass Frame

Lift the glass frame up b and pull it forward to

remove. NOTE:

You may need to lift the glass frame while re- attaching.

Re-Attaching the Glass Frame:

NOTE:

Use the included cove covers for those faces requiring them.

Latch Bracket

The spring pin will disengage from the latch bracket, opening the latch.

a)Hang the glass frame on the firebox.

b)While holding in place, attach the upper latches (follow the instructions to the right in reverse).

c)Lift the glass frame slightly and attach the lower latches.

© Travis Industries

4060111

100-01175

Image 21
Contents Travis Industries, Inc DVS Insert EFIntroduction Important Information 2IntroductionSave Your Bill of Sale 4060111Table of Contents If YOU Smell GAS Safety PrecautionsDo not place anything inside Heating Specifications Features Installation OptionsDimensions Natural Gas PropaneInstallation for qualified installers only Fireplace Requirements Top Convection DeflectorHearth Requirements Leveling BoltsFactory-Built Metal Wood-Burning Fireplace Requirements Mantel Clearances ClearancesFace Sizing Requires the Bedford DVS EF II Face Upgrade KitMounting the Bedford Face Gas Line Requirements Gas Line LocationGas Inlet Pressure Altitude Considerations Vent RequirementsVent Restrictor Vent InstallationVent Location Vent ConfigurationsVent Connector Removal and Installation Vent Connector Removal Surround Panel Installation Installation Without Surround Panels Installation of the On/Off Switch and RheostatElectrical Connection Glass Frame Removal and Installation Finalizing the InstallationFinalizing the Installation Log Set Installation Finalizing the Installation Steps for Finalizing the Installation Air Shutter AdjustmentPilot Flame Inspection Fine Tuning the EMBER-FYRE Burner Operation27 Before You BeginLocation of Controls 28Operation Starting The Pilot FlameSeconds once it is lit Operation29 Adjusting the Flame HeightStarting the Heater for the First Time Turning the Heater On and Off30Operation Adjusting the Blower SpeedNormal Operating Sounds Normal Operating OdorsMaintenance31 Yearly Service ProcedureMaintaining Your Heaters Appearance Troubleshooting Table 32MaintenanceHow this Heater Works Maintenance33What Turns the Main Burners On and Off What Prevents Gas Buildup34Maintenance Wiring DiagramReplacement Parts List Safety Label Safety LabelYears 1 & 2 Coverage Parts & Labor Limted 7 Year WarrantyYears 3 Through 5 Coverage Parts & Labor Years 6 & 7 Coverage Parts onlyLP Conversion Instructions Optional Equipment for qualified installers onlyOptional Equipment for qualified installers only To adjust the pilot flame, turn this screw Note if totally Firebacks Lower Surround Panel Index

DVS Insert EF II specifications

The Avalon Stoves DVS Insert EF II is a sophisticated heating solution designed to bring warmth and comfort to modern homes while enhancing their aesthetic appeal. This impressive insert is characterized by its advanced engineering and striking design, making it a perfect addition to any living space.

One of the primary features of the Avalon DVS Insert EF II is its efficient heating capability. With a heating capacity of up to 2,200 square feet, it is ideal for larger rooms or open concept areas. Utilizing a powerful EPA-certified wood-burning system, the insert delivers a clean and efficient burn, ensuring that you maximize heat while minimizing emissions. This feature aligns with the growing demand for environmentally friendly heating options and complies with strict emissions standards.

The design of the DVS Insert EF II is marked by a large, stylish viewing area that provides an unobstructed view of the flames, creating a beautiful focal point in any room. This model is equipped with a durable glass door that not only showcases the fire but also contributes to the overall energy efficiency by maintaining optimal heat levels within the insert. The clean lines and sophisticated finish of the insert further enhance its visual appeal, making it suitable for both contemporary and traditional interiors.

In addition to its aesthetic charm, the Avalon DVS Insert EF II incorporates advanced technologies that improve user experience and functionality. The built-in temperature control system allows users to adjust the heat output with ease, ensuring a comfortable environment at all times. Furthermore, the unit features an easy-to-use ash pan and a self-cleaning glass mechanism that simplifies maintenance, allowing homeowners to enjoy their fireplace without the hassle of frequent cleaning.

The construction of the DVS Insert EF II emphasizes durability and longevity. Made from high-quality materials, this insert is designed to withstand the rigors of daily use while providing years of efficient heating. The heat exchanger technology maximizes heat output while minimizing the consumption of fuel, making it an economical choice for homeowners.

Overall, the Avalon Stoves DVS Insert EF II is a compelling choice for those seeking a powerful, efficient, and aesthetically pleasing heating solution. Its combination of innovative technologies, user-friendly features, and elegant design positions it as a top contender in the wood stove market, providing both comfort and style for any home. Whether you are looking to replace an old insert or add a new feature to your living space, the Avalon DVS Insert EF II stands out as an exemplary option.