Avalon Stoves DVS Insert EF II owner manual Installation for qualified installers only

Page 7

Installation (for qualified installers only)

7

Installation Warnings

Failure to follow all of the requirements may result in property damage, bodily injury, or even death.

This heater must be installed by a qualified installer who has gone through a training program for the installation of direct vent gas appliances.

This appliance must be installed in accordance with all local codes, if any; if not, follow ANSI Z223.1 and NFPA 54(88).

In Manufactured or Mobile Homes must conform with Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, or, when such a standard is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1. This appliance may be installed in Manufactured Housing only after the home is site located.

The heater is designed to operate on natural gas, or propane (LP).

All exhaust gases must be vented outside the structure of the living-area. Combustion air is drawn from outside the living-area structure.

Notify your insurance company before hooking up this heater.

The requirements listed below are divided into sections. All requirements must be met simultaneously. The order of installation is not rigid – the qualified installer should follow the procedure best suited for the installation.

Packing List

Propane Conversion Kit

Log Set

Cove Covers

Glass Latch Key (to un-latch glass frame)

"Fireplace Altered" tag (attach to the fireplace)

Arched/Artisan/Metropolitan/Vict. Lace Face Brackets

Additional Items Required

Faceplate

6-5/8" to 3" & 3" Co-Linear Adapter - with flashing (Simpson Duravent part # 923GK)

3" Diameter Gas Liner (2)

Direct Vent Cap (Simpson Duravent Part # 991)

Gas Line Equipment (shutoff valve, pipe, etc.)

Items Packed with the Face

Face with attachment hardware (Note: use the cove covers included with the heater)

Face Installation Instructions

Order of Installation

1If the heater is to use propane, install the propane conversion kit (see page 37).

2 Install gas line into the fireplace (do not connect to unit).

3 Position the heater.

4 Connect the gas line and gas vent to the appliance.

5 Install the optional surround panels and trim. Attach the on/off switch.

6

Follow the instructions under "Finalizing the Installation" on page 2 5.

© Travis Industries

4060111

100-01175

Image 7
Contents Travis Industries, Inc DVS Insert EF4060111 2IntroductionIntroduction Important Information Save Your Bill of SaleTable of Contents If YOU Smell GAS Safety PrecautionsDo not place anything inside Natural Gas Propane Features Installation OptionsHeating Specifications DimensionsInstallation for qualified installers only Fireplace Requirements Top Convection DeflectorLeveling Bolts Hearth RequirementsFactory-Built Metal Wood-Burning Fireplace Requirements Mantel Clearances ClearancesFace Sizing Requires the Bedford DVS EF II Face Upgrade KitMounting the Bedford Face Gas Line Location Gas Line RequirementsGas Inlet Pressure Altitude Considerations Vent RequirementsVent Restrictor Vent InstallationVent Location Vent ConfigurationsVent Connector Removal and Installation Vent Connector Removal Surround Panel Installation Installation of the On/Off Switch and Rheostat Installation Without Surround PanelsElectrical Connection Glass Frame Removal and Installation Finalizing the InstallationFinalizing the Installation Log Set Installation Finalizing the Installation Air Shutter Adjustment Steps for Finalizing the InstallationPilot Flame Inspection Fine Tuning the EMBER-FYRE Burner Before You Begin Operation27Location of Controls Starting The Pilot Flame 28OperationSeconds once it is lit Turning the Heater On and Off Adjusting the Flame HeightOperation29 Starting the Heater for the First TimeNormal Operating Odors Adjusting the Blower Speed30Operation Normal Operating SoundsYearly Service Procedure Maintenance31Maintaining Your Heaters Appearance Troubleshooting Table 32MaintenanceWhat Prevents Gas Buildup Maintenance33How this Heater Works What Turns the Main Burners On and OffWiring Diagram 34MaintenanceReplacement Parts List Safety Label Safety LabelYears 6 & 7 Coverage Parts only Limted 7 Year WarrantyYears 1 & 2 Coverage Parts & Labor Years 3 Through 5 Coverage Parts & LaborLP Conversion Instructions Optional Equipment for qualified installers onlyOptional Equipment for qualified installers only To adjust the pilot flame, turn this screw Note if totally Firebacks Lower Surround Panel Index

DVS Insert EF II specifications

The Avalon Stoves DVS Insert EF II is a sophisticated heating solution designed to bring warmth and comfort to modern homes while enhancing their aesthetic appeal. This impressive insert is characterized by its advanced engineering and striking design, making it a perfect addition to any living space.

One of the primary features of the Avalon DVS Insert EF II is its efficient heating capability. With a heating capacity of up to 2,200 square feet, it is ideal for larger rooms or open concept areas. Utilizing a powerful EPA-certified wood-burning system, the insert delivers a clean and efficient burn, ensuring that you maximize heat while minimizing emissions. This feature aligns with the growing demand for environmentally friendly heating options and complies with strict emissions standards.

The design of the DVS Insert EF II is marked by a large, stylish viewing area that provides an unobstructed view of the flames, creating a beautiful focal point in any room. This model is equipped with a durable glass door that not only showcases the fire but also contributes to the overall energy efficiency by maintaining optimal heat levels within the insert. The clean lines and sophisticated finish of the insert further enhance its visual appeal, making it suitable for both contemporary and traditional interiors.

In addition to its aesthetic charm, the Avalon DVS Insert EF II incorporates advanced technologies that improve user experience and functionality. The built-in temperature control system allows users to adjust the heat output with ease, ensuring a comfortable environment at all times. Furthermore, the unit features an easy-to-use ash pan and a self-cleaning glass mechanism that simplifies maintenance, allowing homeowners to enjoy their fireplace without the hassle of frequent cleaning.

The construction of the DVS Insert EF II emphasizes durability and longevity. Made from high-quality materials, this insert is designed to withstand the rigors of daily use while providing years of efficient heating. The heat exchanger technology maximizes heat output while minimizing the consumption of fuel, making it an economical choice for homeowners.

Overall, the Avalon Stoves DVS Insert EF II is a compelling choice for those seeking a powerful, efficient, and aesthetically pleasing heating solution. Its combination of innovative technologies, user-friendly features, and elegant design positions it as a top contender in the wood stove market, providing both comfort and style for any home. Whether you are looking to replace an old insert or add a new feature to your living space, the Avalon DVS Insert EF II stands out as an exemplary option.