Regency U38-NG1, U38-LP1 specifications Venting Requirements, Flue Mounting Bracket

Page 2

Gas Stoves

U38 Gas Stove

Venting

This heater is a vented appliance and must be connected to a chimney/ fl ue in accordance with the installation codes.

Note: The rear pedestal cover plate is only required when outside air is being used. If using room air for combustion, remove this plate from the back of the pedestal.

For your safety this heater is equipped with a vent safety switch designed to sense incorrect venting and react by shutting down the gas supply. This thermally actuated switch is located within the draft hood and will detect either a blocked chimney or backdraft condition where the chimney flow has reversed. If this switch shuts the unit down, it indicates a drafting problem that must be identified and rectified without delay - the thermally activated switch must never be bypassed or disconnected as a hazardous or deadly condition can result.

Venting Requirements

A four inch diameter vent is required. B-Vent, Class A or Masonry with an approved liner are all acceptable. For cosmetic or aesthetic purposes 6" outer vent can be used as long as an approved inner vent is installed. Fasten but do not penetrate the inner sleeve of the B-Vent when tightening the screw.

Follow all venting manufacturer’s requirements and local building codes. In cold climates, we recommend the use of insulated B-Vent, chase, and liners. For altitudes above 2000 ft. we recommend that a minimum fl ue height of 12 ft. is used.

Flue Mounting Bracket

Attach the fl ue mounting bracket with the enclosed screw as shown in the diagram.

156

Gas Stoves

Installation into Existing

Wood Stove Flue System

1)Clean existing Chimney system.

2)Run an approved 4" fl ex liner or "B" vent into existing chimney.

Note: See the chimney systems manufacturer for detailed installation instructions.

June 2007 Regency Product Specifications Book

Image 2
Contents Gas Stoves U38 Top Vent Freestanding B-Vent Gas StoveVenting Requirements Installation into Existing Wood Stove Flue SystemVenting Flue Mounting Bracket

U38-NG1, U38-LP1 specifications

The Regency U38-LP1 and U38-NG1 are advanced residential heating solutions, known for their efficiency and modern design. Both models stand out in the market for their innovative features that cater to the increasing demand for sustainable and effective heating systems.

The U38-LP1 operates on liquid propane, while the U38-NG1 is designed to run on natural gas. This versatility allows homeowners to choose the model that best meets their energy availability and preferences, ensuring an optimal heating solution based on regional resources and infrastructure.

One of the main features of the Regency U38 series is its remarkable efficiency. These models utilize state-of-the-art combustion technology that maximizes heat output while minimizing environmental impact. The high-efficiency ratings translate into significant cost savings on energy bills, making them an appealing choice for homeowners looking to reduce their energy expenses.

The design of both models is another highlight. The U38-LP1 and U38-NG1 ensconce elegant aesthetics with functional engineering. Their sleek, modern look complements a variety of home styles, while the large viewing glass allows homeowners to enjoy the mesmerizing glow of the flame. The ample firebox provides a considerable amount of heat, creating a warm ambiance in any living space.

These units also incorporate advanced control features. With programmable thermostats and remote control options, users can easily manage their heating system for optimal comfort. The flexibility of setting specific heating schedules enhances energy efficiency and personal comfort.

Additionally, the Regency U38 models prioritize safety with features like a tempered glass door, which remains cool to the touch, ensuring the safety of children and pets. The units are also designed for easy maintenance with accessible components that simplify cleaning and servicing.

The technology found in the U38-LP1 and U38-NG1 models is noteworthy as well. Incorporating cutting-edge burner systems, both models provide consistent, reliable heat even during the coldest months. The use of smart ventilation systems contributes to improved indoor air quality, keeping homes comfortable and healthy.

In summary, the Regency U38-LP1 and U38-NG1 bring forward an impressive combination of efficiency, design, advanced technology, and safety features that make them exceptional choices for homeowners seeking reliable and stylish heating solutions. With their various functionalities, these models are poised to meet the diverse needs of modern living spaces, merging comfort with environmental consideration.