Regency MX Excel owner manual Electrical Connections

Page 10

ELECTRICAL CONNECTIONS

ELECTRICAL CONNECTIONS: *Be sure electricity is turned off at the main power box before wiring

1.Four wires are connected to the fan. Black – this is the “hot” power to run fan.

White – this is the “common” power to run fan and light. Blue – this is the “hot” power for light kit.

Green – ground wire (on bracket or downrod).

2.If fan and light are to be connected to the same circuit, black and blue wires can both be connected to house circuit black wire.

NOTE: The other end of the blue wire, (light circuit) is in the switch housing with a wire nut and label for light kit attachment. The white wire (common for light kit) is also there.

WARNING: If light kit is not used, DO NOT connect blue wire at the ceiling.

8

Image 10
Contents Style that revolves around you General Installation & Operation Instructions Important SafeguardsImportant Safety Precautions Tools and Materials RequiredUnpacking Your FAN Installing the Mounting Bracket PreparationInstalling the FAN Hugger Mounting ˝ Downrod MountingInstalling the FAN Hugger Style Installing the FAN with a Downrod Installing the FAN with a Downrod Electrical Connections Blade Attachment Installation of Removable Switch Housing Troubleshooting in Case of Difficulty OperationCare and Cleaning