Regency MX Excel owner manual Unpacking Your FAN

Page 4

UNPACKING YOUR FAN

1.Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.

2.Examine all parts. You should have the following:

1

2

3

4

5

6

7

8

9

10

11

12

1.Fan blades (5) (Packed in separate box.)

2.Hanging bracket

3.Ceiling canopy

4.Downrod/ball assembly

5.Decorative collar cover

6.Fan housing with motor (Remove rubber shipping supports around motor, if included on your fan. Save screws.)

7.DetachableSwitch housing

8.Blade arms (5)

9.Pull chain with fob

10.Bracket mounting hardware (wood screws, screws, lock washers, washers, wire nuts)

11.Blade arm to blade screws, w/washers (15)

12."S" hook (Used for hugger style mounting.)

NOTE: Design of parts shown above may look slightly different for your specific model of fan.

REVISED NOVEMBER 2007

2

Image 4
Contents Style that revolves around you General Installation & Operation Instructions Important SafeguardsImportant Safety Precautions Tools and Materials RequiredUnpacking Your FAN Installing the Mounting Bracket PreparationInstalling the FAN Hugger Mounting ˝ Downrod MountingInstalling the FAN Hugger Style Installing the FAN with a Downrod Installing the FAN with a Downrod Electrical Connections Blade Attachment Installation of Removable Switch Housing Troubleshooting in Case of Difficulty OperationCare and Cleaning