Kuma Stoves K-300, K-400 manual Chimney Refer to figure

Page 7

Section K- Proper Draft Information

(continued..)

6

appliance and chimney connector joints. An uncontrollable burn or a glowing red stove part or chimney connector indicates excessive draft. A poor draft can cause poor stove performance and can be remedied with a positive connect or chimney liner. Consult your dealer for help. KUMA stoves are approved for use with or without liner connect in properly constructed, clay-lined masonry chimneys.

Section L- K-400 Free-Standing Wood Stove Installation Instructions

If this wood stove is not properly installed, a house fire may result. To reduce the risk of fire, follow the installation instructions. WARNING: Do not compromise clearances, codes, or materials used. Contact local building or fire officials about restrictions and installation inspection requirements in your area.We also recommend that your Kuma model HT wood stove be installed by a properly trained and licensed installer, preferably an NFI (National Fireplace Institute) expert.

*PARTS REQUIRED:

1)Model K-400 wood stove– 8” flue

2)Floor protector

3)Chimney connector (stovepipe)

4)Chimney (Refer to figure 5)

a.Chimney sections

b.Fire stop

c.Support box

d.Storm collar

e.Roof flashing

f.Chimney spark arrestor cap

USE ONLY 8” DIAMETER CHIMNEYS THAT HAVE BEEN TESTED TO

ALL APPLICABLE U.L. 103-HT STANDARDS.

*Floor Protector- The floor protector must be non-combustible and must be a minimum of 46” wide and 48” deep (U.S.) and 46” wide and 50” deep (CAN.). Situate heater on floor protector according to the following: Dimensions: At least 18” of floor protector in front of the stove and at least 8” beyond each side of the door opening. Floor protector shall be large enough to cover under the flue pipe and 2” beyond each side of the flue connector (see figure 4).

*Chimney Connector- Use chimney connectors (flue pipe) that has been approved for use with this appliance. The connector shallbe 8” in diameter, and made of steel, 24 gauge thickness minimum. The chimney connector shall be slipped inside the flue of the stove and should be screwed to the flue for maximum safety. Each chimney connector section should be fastened securely together with screws. Approved double-wall connector may be used for reduced clearance applications (see figs. 2 and 3).

(continued…)

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Kuma Stoves Section D- Fuel Selection Section A- Stove Description and ComplianceSection B- Tamper Warning Section C- Catalyst InformationSection F- Catalyst Monitoring Section E- Achieving and Maintaining Catalyst Light-OffSection H- Operation and Maintenance Section G- Catalyst TroubleshootingSymptom Problem Remedy See for Locations of Gasket Section I- Catalyst ReplacementAchieving Proper Draft Section J- Stove Maintenance WarningsSection K- Proper Draft Information Disposal of AshesChimney Refer to figure Installation Instructions Section L- Installation InstructionsPreliminary Checks Section M- K-300 Fireplace Insert Installation InstructionsAttaching the faceplate Section M- K-300 Installation Instructions …Limited Lifetime Warranty Section N- WarrantySection O- Figures 1-5 Typical Home Installation

K-400, K-300 specifications

Kuma Stoves has built a reputation for delivering high-quality wood stoves that combine efficiency, longevity, and aesthetic appeal. Among their impressive lineup, the K-300 and K-400 models stand out for their advanced features and innovative technologies, making them popular choices for those looking to add an efficient heating solution to their homes.

The Kuma Stoves K-300 is designed for small to medium-sized spaces, offering a compact yet powerful heating option. One of its main features is the high-efficiency burn technology, which maximizes heat output while minimizing emissions. This stove is equipped with a secondary combustion system that ensures the fuel is burned thoroughly, resulting in fewer particulates released into the atmosphere. The K-300 also boasts an impressive heat output range, providing warmth in even the coldest climates.

In contrast, the K-400 is engineered for larger spaces, providing an extra boost of heat with its higher capacity. This model is known for its robust construction, featuring a heavy-duty steel plate body that enhances durability and lifespan. Similar to the K-300, the K-400 utilizes advanced combustion technology, optimizing the use of wood fuel and enhancing efficiency. It's designed with a large firebox, allowing for longer burn times and accommodating larger logs, which translates to fewer refueling interruptions.

Both models incorporate Kuma's distinctive Air Control System, allowing users to easily adjust the airflow for more precise temperature regulation. This feature not only enhances user convenience but also plays a critical role in maximizing combustion efficiency.

Aesthetically, both the K-300 and K-400 showcase a modern design, featuring a large glass door that offers an unobstructed view of the fire, enhancing any living space's ambiance. The stoves are also available in various finishes to match different decor styles.

Environmentally conscious consumers will appreciate that both models meet stringent EPA certification standards, ensuring that they burn cleanly and efficiently. With their blend of technology, craftsmanship, and style, Kuma Stoves' K-300 and K-400 models represent an ideal choice for anyone looking to add a reliable and effective wood heating solution to their home. Whether you have a smaller space or a larger area to heat, these stoves deliver performance without compromising on aesthetics or environmental responsibility.
Top Page Image Contents