Lopi Freedom Bay Fireplace Insert Insert with Positive Connection, Insert with Direct Connection

12 Installation (for qualified installers only)

Insert with

Positive

Connection

NOTE:

Most factory-built chimney manufacturers make stainless steel chimney liners, either flexible or rigid. This provides a wide variety of installation options. Make sure to follow the manufacturer's instructions for installation and support.

Install a non-combustible cover plate to prevent water from entering the chimney

Combustible Mantle

Surround Panels

See the section "Insert Placement Requirements" for minimum clearances and hearth required.

Cap (prevents water

from entering)

Flue Liner

The liner must be stainless steel connector or flexible vent. Follow the liner manufacturer's

insturctions for installation and

support.

Airtight Insulated Clean-Out

Remove damper or wire it open

Figure 6

Insert with Direct

Connection

NOTE:

Direct connections require installation of an airtight block-off plate or damper

adapter (see "Block-off Combustible Mantle Plate Installation" on

page 11).

Surround Panels

See the section "Insert Placement Requirements" for minimum clearances and hearth required.

Flue

Liner

Stainless steel chimney connector must Extend 1' past the block-off plate or to the flue liner

Airtight

Insulated

Clean-Out

Remove damper or wire it open

Block-off plate or damper adapter

© Travis Industries 100-01163 4041129