Magnavox LSS-40CP manual Shut Off Procedure, Off Mode, On Manual Mode, Delay Timer Mode, Auto Mode

Page 4

Step 6. ON the initial use of a transmitter, a recognition operation is required between the receiver/valveandtransmitter. Change theswitch from LOCAL to REMOTE. Press the fan or flame button on the transmitter within 30 seconds. The LED will blink indicating the transmitter will now work with the receiver/valve. If the switch continues in the REMOTE position, the transmit- ter will now control the main valve, flame modu- lation level and fan control.

Step 7. If the manual switch is in the LOCAL position, the valve will be at the highest fixed pressure setting. The transmitter will control the fan only.

Shut Off Procedure

Screw Cap Of Pilot

Piezo Ignitor

Adjustment

 

Local/Remote

Pilotstat

LED

Antenna

Switch

Knob

 

 

Figure 2

If the manual switch is in the REMOTE posi- tion, the transmitter can shut off the main burner and fan. However, the control is still on and a command from the transmitter can turn on the main burner or fan.

To shut off the system, turn the pilotstat knob clockwise to the OFF position. This action closes the main gas and safety valves. The transmitter now cannot turn on the main burner or fan.

TRANSMITTER OPERATION - (refer to Figure 3 )

Off Mode

In the OFF mode, the fireplace flame and fan are off, the display will show OFF and displays the room temperature. If the receiver is in REMOTE mode, the fireplace will shut off.

Mode

- Auto

- On

- Off

Countdown

Timer

Fan

Figure 3

Display

-Room Temperature

-Set Temperature

-Flame Height Level

-Fan Speed Level

-Countdown Timer

-Low Battery

Flame

Up

(Increases Flame

Height, Fan Speed Timer, or Set Point)

Down (Decreases Flame, Fan Speed Timer, or Set Point)

On (Manual) Mode

In the ON mode, the room temperature, flame and fan levels will be shown. MANUAL will appear next to both the flame and fan icons.

When the control is in the ON mode, the flame and fan levels, and the delay timer are changed with the up and down buttons. To change the flame level, press the flame button followed by an arrow key. To change the fan level, press the fan key followed by an arrow key. Pushing the arrow key once will change the level by one unit.

Delay Timer Mode

The shut off delay timer has a maximum of 2 (two) hours and a minimum of 0 (zero) min- utes. To change the timer level, press the time key followed by an arrow key. Pushing the key once will change the timer by 10 (ten) minutes.

Auto Mode

In the AUTO mode, the room temperature, set temperature, flame and fan levels will be shown. AUTO will appear next to both the flame and fan icons.

When the control is in the AUTO mode, the main burner will turn on/off or modulate based on the heat needed to maintain the set tempera- ture. The flame level will change automatically to optimize the heat output needed to maintain the set temperature. To change the set tem- perature, press the up or down key. Pushing a key once will change the temperature by 1 (one) degree. The setting temperature range from 40° F (4.5° C) to 90° F (32.0° C).

In the AUTO mode, the fan speed will increase with increasing flame height or decrease with decreasing flame height. "AUTO" is displayed next to the flame and fan icons.

Fan Override During Auto Mode

If a lower or higher fan speed is desired when operating in the AUTO mode, the fan speed can be overridden by pushing the fan button fol- lowed by the up or down key.

Pushing a key once will change the fan level by one unit. In this mode "AUTO" is displayed next to the flame icon and "MANUAL" is displayed next to the fan icon.

Change Between F/C Temperature Units

Push the up and down arrow keys simulta- neously for at least 3 seconds to toggle be- tween Fahrenheit and Celsius units.

Disable Thermostat Function

To disable the thermostat function in the AUTO mode, push the time and down key simulta- neously for at least 3 seconds.

4

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 875,020M REV. a 12/2002 OTL Report No -F-02-05Congratulations Operation and Care of Your Appliance Instructions for RF Comfort Control ValveFor piezo ignitor location, refer to Figure Showing Piezo Ignitor LocationShut Off Procedure Off ModeOn Manual Mode Delay Timer ModeTroubleshooting Comfort Valve Wiring DiagramAuto Path Diagram To Change BatteriesMaintenance Maintenance Task Accomplishing Person Procedure Maintenance ScheduleVent restrictor adjustment rod Burner Adjustments Front Glass Enclosure Panel, Removal and InstallationFlame Appearance and Sooting Adjustment ConfigurationVent Restrictor VentingLog Placement Model LSS-35 Model LSS-40Warranty Replacement PartsGlowing Embers Rockwool Placement Product Reference InformationAccessory Components Cast Iron KitsGrillwork Kits Top & Bottom Touch-Up Paint KitRectangular Face Kits Arched Face KitsRectangular Face Kits Model Finish Catalog No Model No Arched Face Kits Model Finish Catalog No Model NoLSS-35 Replacement Parts 875,020M REV. a 12/2002

LSS-40CP specifications

The Magnavox LSS-40CP is a noteworthy addition to the realm of home entertainment, combining innovative technology with user-friendly features. Launched as part of Magnavox's commitment to delivering quality audio and visual experiences, this model stands out for its versatility and functionality.

One of the key features of the LSS-40CP is its impressive display technology. Equipped with a high-definition LCD screen, it offers vibrant colors and sharp image clarity that enhance the overall viewing experience. The 40-inch display strikes a balance between size and usability, making it suitable for various room settings, from cozy living rooms to larger entertainment spaces.

Audio quality is another highlight of the Magnavox LSS-40CP. It integrates advanced sound technology that ensures a rich and immersive audio experience. The built-in speakers produce clear and powerful sound, while options for external audio connections allow users to further enhance their sound system for movie nights or gaming sessions.

Connectivity is a crucial feature of modern entertainment devices, and the LSS-40CP excels in this area. It includes multiple HDMI and USB ports, enabling seamless connections to various devices such as gaming consoles, streaming devices, and external media players. This versatility ensures that users can easily switch between different input sources, catering to an array of entertainment preferences.

The LSS-40CP also features smart technology integrations, allowing for access to streaming services and apps directly on the device. Users can easily enjoy their favorite shows and movies without the need for additional hardware. The user interface is designed to be intuitive, providing straightforward navigation for accessing content quickly.

In terms of design, the Magnavox LSS-40CP showcases a sleek and modern aesthetic that complements contemporary home decor. Its slim bezel design maximizes screen real estate while maintaining an elegant appearance.

Furthermore, energy efficiency is an important attribute of the LSS-40CP. With its advanced technology, it minimizes power consumption while delivering top-notch performance, aligning with eco-friendly initiatives and saving users on electricity bills.

In summary, the Magnavox LSS-40CP integrates cutting-edge technology with practical features, making it an attractive option for those seeking a quality home entertainment experience. Its combination of visual and audio performance, connectivity options, and smart capabilities positions it as a noteworthy contender in the market, appealing to both casual viewers and dedicated enthusiasts.
Top Page Image Contents